Overview
The Moog K3166 is a front upper control arm bushing for the 1984–1987 Jeep Cherokee (XJ), 1986–1987 Jeep Comanche, 1984–1987 Jeep Wagoneer (SJ), 1993 Jeep Grand Wagoneer (SJ) and 1993–1998 Jeep Grand Cherokee (ZJ). It fits either the left or right side and is sold as the rear bushing only.
The control arm connects the steering knuckle and wheel assembly to the frame, and its bushing absorbs impacts from the road. Worn bushings can cause early tire wear, handling issues and noise under the chassis, so the rear bushing is replaced as a single piece.
Key features
- Rear bushing position
- Fits left or right side
- Direct fit for the listed Jeep models
Before you replace
Control arm bushings wear over time, and the rubber or polyurethane element can split, crack or collapse under load. When a bushing is worn, the wheel can move in ways the suspension was not designed for, which often shows up as clunking over bumps or a loose feel at highway speed. Inspect the bushing for cracks, separation from the metal sleeve and visible movement when the arm is levered by hand with the vehicle safely supported.
Because the upper control arm works with the lower arm, spring and shock to hold the axle in place, a worn bushing can add stress to nearby parts. Many shops inspect the ball joints, the opposite side bushing and the mounting bolts at the same time. Tighten the fasteners to the factory specification once the vehicle is back on the ground, and recheck them after the first few drives.
- Check the frame mounting bolts for looseness
- Look for uneven tire wear across the front axle
- Inspect the other upper bushing on the same side
Specifications
| Brand | Moog |
|---|---|
| Part number | K3166 |
| Position | Front upper control arm, rear bushing |
| Side | Left or right |
| Quantity | Rear bushing only |
| Fitment type | Direct fit |
Vehicle fitment
It fits the 1984–1987 Jeep Cherokee (XJ) (Base, Chief, Laredo, Limited, Pioneer), 1986–1987 Jeep Comanche (Base, Chief, Custom, Laredo, Pioneer, X, XLS), 1993–1998 Jeep Grand Cherokee (ZJ) (5.9 Limited, Base, Laredo, Limited, Orvis, SE, TSi), 1993 Jeep Grand Wagoneer (SJ) (Base) and 1984–1987 Jeep Wagoneer (SJ) (Base, Limited).
The list does not include the Cherokee XJ for 1988 and later, the Jeep Wrangler, or the Grand Cherokee WJ. Confirm your vehicle’s year, model and trim before ordering.
What’s included
The rear bushing only. The front bushing is not part of this kit.









