Overview
The Rubicon Express JK4R43M is a 3.5-inch extreme-duty long arm lift kit with a 4-link front, a radius rear and Mono-Tube shocks included. It fits the 2007-2018 Jeep Wrangler (JK) and belongs to Rubicon Express’s JK suspension line. It is the shock-equipped version of the JK4R43 and uses the same arm set.
The arm set uses adjustable chromoly upper and lower control arms with Super-Flex spherical ball joints and PT-Meg Super-Ride bushings. The system delivers control and performance without limiting articulation. The full-width transmission crossmember adds durability and frame rigidity, and the install needs no welding. Optional belly pan and CNC-machined steering knuckle upgrades are available.
Key features
- 3.5-inch lift height, within the 3 to 4.99-inch range
- Extreme-duty 4-link front and radius rear long arm layout
- Mono-Tube shocks included
- Adjustable chromoly upper and lower control arms
- Super-Flex spherical ball joints
- PT-Meg Super-Ride bushings
- Full-width transmission crossmember
- Optional belly pan and steering knuckle upgrades
Geometry and alignment
Changing the front and rear arm layout affects more than ride height. The pinion angle, caster and driveline angles all shift once the arms are installed, and those angles set how the driveline and axles work under load. A shop that can measure and adjust them after the install helps keep vibration and premature joint wear in check.
Shocks are a related choice in this build. The Mono-Tube shocks included with the kit should be checked for mounting clearance as well, since worn bushings or mounts can undermine any shock setup. When the work is complete, a test drive at low speed helps reveal vibration or steering changes that need a follow-up adjustment.
- Measure pinion and driveline angles after the install
- Inspect bushings and mounts before the first drive
- Recheck hardware after the first few drives
Specifications
| Brand | Rubicon Express |
|---|---|
| Part number | JK4R43M |
| UPC | 70000651287 |
| System type | Extreme-duty 4-link front and radius rear long arm |
| Lift height | 3.5 inches (chart range 3 to 4.99 inches) |
| Rear lift method | Radius arm |
| Control arms | Chromoly upper and lower, adjustable |
| Joints | Super-Flex spherical ball joints |
| Shocks | Mono-Tube, included |
Vehicle fitment
The kit fits the 2007-2018 Jeep Wrangler (JK) Unlimited and 4-door versions of that generation.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The radius rear and 4-link front change control arm and pinion geometry, so the alignment and driveline angles should be checked after installation. The Mono-Tube shocks come with the kit, so the shock installation follows the rest of the job.
What’s included
The kit includes the adjustable chromoly control arms, Super-Flex spherical ball joints, PT-Meg Super-Ride bushings, the full-width transmission crossmember and Mono-Tube shocks.
Installing the kit involves changing the arm geometry at both ends, which the brand describes as part of the system’s control and articulation design. Once the job is finished, the alignment and driveline angles should be checked to confirm the new geometry is correct.
