Overview
The Rubicon Express JKR443FP is a 3.5 inch extreme duty lift kit for the Jeep Wrangler JK, built around a radius front and rear 4-link long arm system. Rubicon Express offers this kit with Fox Performance shocks at both ends, and the kit covers the most popular Jeep JK suspension systems.
The control arms are chromoly and adjustable. The joints are Super-Flex spherical ball joints, paired with PT-MEG Super-Ride bushings, and the kit includes a full width transmission crossmember.
The kit is installed with no welding. The FOX Performance shocks carry the FOX warranty and are not eligible for the Rubicon Express Advantage Warranty.
Key features
- Radius front and rear 4-link long arm system
- Chromoly upper and lower control arms
- Adjustable control arms
- Super-Flex spherical ball joints
- PT-MEG Super-Ride bushings
- Front and rear Fox Performance shocks
- Full width transmission crossmember
- No welding
Radius 4-link setup notes
A radius 4-link takes the place of the stock links with arms that control both braking and acceleration. The radius arm is fixed at the frame and the link positions set the axle path, so the joints and bushings matter more than on a typical lift. When the joints develop slop, the axle can drift and steering can feel vague.
Driveline angles and exhaust clearance are the two things most worth checking after the install. Models from 2012 onward may need an exhaust modification or a front drive shaft, so plan for that ahead of time. Shock mounts and steering linkage can also be replaced alongside the arms when the vehicle is already apart.
- Grease joints on the schedule your use requires
- Check bushings for cracking after rough runs
- Look at exhaust hangers for stress after the install
Specifications
| Brand | Rubicon Express |
|---|---|
| Part number | JKR443FP |
| Lift height | 3.5 inch |
| Lift height range | 2.5 to 3.5 inches |
| Suspension type | Extreme duty radius front and rear 4-link |
| Control arm material | Chromoly |
| Ball joints | Super-Flex spherical |
| Bushings | PT-MEG Super-Ride |
| Shocks | Fox Performance, front and rear |
| Welding | None required |
Vehicle fitment
It fits the 2007–2018 Jeep Wrangler (JK). Make sure year, model and trim match your vehicle before you order.
The JL, the Gladiator, and the older TJ and LJ are not part of this fitment. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
A radius 4-link kit changes axle location and driveline angles, so check both after installation. Models from 2012 onward may need an exhaust modification or a front drive shaft.
What’s included
Radius front and rear 4-link long arms, chromoly upper and lower control arms, Super-Flex spherical ball joints, PT-MEG Super-Ride bushings, a full width transmission crossmember and front and rear Fox Performance shocks.





