Overview
The Rubicon Express RE5015 is a spring-over axle conversion lift kit that moves the leaf spring perches to the top of the axle. With stock-height springs it gives a net lift increase of at least 5.5 inches, which keeps the factory ride quality. It is offered without shocks and fits the 1987-1995 Jeep Wrangler (YJ).
Installing the kit means removing the original spring perches and welding new perches in place, along with other adjustments. A CV-type drive shaft is recommended for this application, and steering modifications are needed on a spring-over conversion. The RE1445 and RE1444 Extreme-Duty leaf springs are the recommended pairing for greater durability and a total of 7 inches of lift.
Key features
- 5.5-inch minimum net lift with stock-height springs
- Spring-over conversion that moves the leaf spring perches to the top of the axle
- Spring perches and spring plates included
- Brake lines and drop pitman arm included
- Instructions and hardware included
- Option to use RE1445 and RE1444 leaf springs for 7 inches of lift
Spring-over axle planning
A spring-over conversion changes how the axle sits under the frame, so the work goes beyond the spring pack itself. The leaf springs, perches and shackle geometry all move, which affects pinion angle and the way the axle tracks under load. Plan for a driveline check after the swap, and recheck the U-bolts once the vehicle has been driven a short distance.
Steering geometry needs attention too, since the drop pitman arm and related linkage work change steering angles. Many owners also inspect the brake hoses after the conversion, because the axle position shifts. Good welds on the new perches matter more than almost anything else, so use a fabricator who knows axle work and inspect the welds periodically for cracks.
- Check U-bolt torque after the first drives
- Inspect brake hoses for stretch or chafing
- Recheck steering alignment after the swap
Specifications
| Brand | Rubicon Express |
|---|---|
| Part number | RE5015 |
| UPC | 614901441390 |
| Kit type | Spring-over axle conversion |
| Lift height | 5.5 inches minimum net (chart range 5 to 6.99 inches) |
| Included parts | Spring perches, spring plates, brake lines, drop pitman arm |
| Rear lift method | Stock leaf spring |
| Shocks | Not included |
Vehicle fitment
It fits the 1987-1995 Jeep Wrangler (YJ) across several trim names.
The TJ, JK and JL generations are not part of this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
This conversion requires removing the original spring perches and welding new perches in place, along with other adjustments. Steering modifications are needed, and a CV-type drive shaft is recommended for this application.
What’s included
The kit includes spring perches, spring plates, brake lines, a drop pitman arm, instructions and hardware.
Not included: shock absorbers.
Spring-over conversions move the leaf spring perches to the top of the axle, and with stock-height springs they keep the factory ride quality. Steering modifications and a CV-type drive shaft are part of planning for this conversion.


