Overview
The Rubicon Express JKRR44 is a 4.5-inch extreme-duty radius long arm lift kit with chromoly radius arms front and rear, sold without shocks. It fits the 2007-2018 Jeep Wrangler (JK) and is part of the brand’s JK suspension line. The kit uses adjustable control arms with serviceable Super-Flex spherical ball joints, along with PT-Meg Super-Ride bushings.
The Extreme-Duty Long Arm System is a radius long arm suspension for the Jeep Wrangler JK. It is engineered to work with the Jeep’s electronic stability controls. The arm geometry keeps pinion and driveshaft angles in phase. The full-width transmission crossmember adds durability and frame rigidity. The kit covers lifts from 3 to 4.99 inches.
Key features
- 4.5-inch lift height, within the 3 to 4.99-inch range
- Chromoly radius arms front and rear
- New PT-Meg Super-Ride bushings
- Adjustable control arms
- Serviceable Super-Flex spherical ball joints
- Designed for on- and off-road use.
Shock choice and alignment
Without shocks, this kit leaves the damping choice to the buyer, so pick units with a length and valving suited to the lift and your driving. Shocks are a major part of ride control, so worn units should be replaced before or during the arm install rather than after.
Radius arm kits change control arm and pinion angles, which makes alignment an important step once the parts are on. A specialist with experience in long arm geometry can set caster and toe to suit the new arms. Recheck alignment after any tire size change.
Check the Super-Flex ball joints and PT-Meg bushings at regular service intervals, and inspect the arms for cracks around their mounts. Serviceable joints can be greased and replaced individually, which keeps the arms usable for longer.
Specifications
| Brand | Rubicon Express |
|---|---|
| Part number | JKRR44 |
| UPC | 70000651256 |
| System type | Extreme-duty radius long arm |
| Lift height | 4.5 inches (chart range 3 to 4.99 inches) |
| Rear lift method | Radius arm |
| Control arms | Chromoly radius arms front and rear; adjustable control arms |
| Joints | Serviceable Super-Flex spherical ball joints |
| Shocks | Not included |
Vehicle fitment
Fitment covers 2007-2018 Jeep Wrangler (JK) vehicles, including Unlimited models and other JK variants in that range.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Radius arms at both ends change the arm angles and steering geometry, so the alignment and driveline angles should be checked once the kit is installed.
What’s included
The kit includes the chromoly radius arms, adjustable control arms, serviceable Super-Flex spherical ball joints and PT-Meg Super-Ride bushings.
Not included: shock absorbers.
