Overview
The Rough Country 3.5-inch Jeep Wrangler JL suspension lift kit, part number R/C62730, fits 2018–2026 Jeep Wrangler (JL) two-door models in the Rubicon, Sport, Sport S, Willys and Willys Sport versions. It is designed to clear 35×12.50 tires and includes front and rear coil springs with a linear coil rate.
The kit includes nitrogen-charged N3 shocks with 10-stage variable valving, an 18mm spring-loaded piston rod and a 54mm shock body. Control arm drop brackets keep the factory arms at the proper geometric angle, and the kit includes sway-bar links, bump stops and a front adjustable forged track bar.
Driveshaft clearance becomes a concern on JL models lifted 3.5 inches or taller, since the factory shaft can run short of clearance at full droop. Rough Country offers a Stage 2 kit with an aftermarket front CV driveshaft for that situation.
Key features
- Front and rear coil springs with a linear coil rate
- N3 nitrogen-charged shocks with 10-stage variable valving
- Control arm drop brackets
- Sway-bar links, bump stops and an adjustable forged track bar
- Designed for 35×12.50 tires
- Listed lift height range of 0 to 3.5 inches
Choosing the right setup
A lift like this changes how the front and rear suspension sit, so the parts around it matter as much as the lift itself. Coil springs set the ride height, while shocks control how the springs move over bumps and on trails. When the body rises, driveline angles and steering geometry change too, which is why related parts such as the driveshaft, brake lines and sway bar links often need attention on a lifted JL.
Before buying, match the kit to your tire plans and how you drive. Larger tires add weight and rotating mass, so confirm that the lift and tire size work together. If you mostly drive on pavement, a softer daily setup may suit you better. If you run rocky trails, pay closer attention to the front axle and shock mounts, and inspect the bushings and joints regularly for cracks, play or leaking shock oil.
Specifications
| Brand | Rough Country |
|---|---|
| Part number | R/C62730 |
| Lift kit | 3.5 inches, stage 1 |
| Shock series | N3, nitrogen-charged |
| Piston rod | 18mm spring-loaded |
| Shock body | 54mm |
| Rear lift method | Coil springs |
| Tire size | 35×12.50 |
| Shocks included | Yes |
| Installation | Light drilling required |
| Lift height range | 0 to 3.5 inches |
| Fitment type | Direct fit |
Vehicle fitment
It fits the 2018–2026 Jeep Wrangler (JL) two-door models in the Rubicon, Sport, Sport S, Willys and Willys Sport versions. Four-door Wrangler JL models and the Wrangler JK and earlier generations are not covered.
Four-door Wrangler JL models are not on this list. The Wrangler JK and earlier generations are not covered.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The installation needs only light drilling. Because the kit lifts a JL by 3.5 inches or more, an aftermarket front driveshaft should be considered, as the brand recommends in its Stage 2 kit.
What’s included
Front and rear coil springs, N3 front and rear shocks, control arm drop brackets, sway-bar links, bump stops and an adjustable forged front track bar.
Not included: the aftermarket front CV driveshaft, which is part of the separate Stage 2 kit.













