Overview
The Rough Country 4-inch Ford F-150 suspension lift kit, part number R/C55531, fits the 2015–2020 Ford F-150 in the King Ranch, Lariat, Limited, Platinum, Police Responder, SSV, XL and XLT versions. It is an all-inclusive kit with lifted knuckles and strut spacers, and it provides enough ride height to run up to 33-inch tires with proper wheel spacing.
The kit adds differential drop brackets, sway-bar drop brackets, brake line brackets and a drive shaft spacer, which the brand says keep the components at optimum angles after lifting. The front and rear crossmembers are updated for the newer F-150 design, and the rear uses fabricated blocks that the brand says are stronger than cast iron blocks and were engineered to prevent axle wrap.
Axle wrap is when the axle rotates under hard acceleration or braking, and rear blocks and drop brackets help control it. The drop brackets lower mounting points so the driveline stays at a workable angle.
Drive shaft spacers help the driveline keep its angle after lifting, and the N3 shocks are included at both ends.
Key features
- Lifted knuckles and strut spacers
- Differential and sway-bar drop brackets
- Brake line brackets and drive shaft spacer
- Front and rear crossmembers updated for the newer F-150 design
- Fabricated rear blocks designed to prevent axle wrap
- N3 premium off-road shocks with chrome-hardened piston rods
Axle wrap and driveline angles
Axle wrap happens when the rear axle rotates under hard acceleration or braking. Rear blocks and drop brackets help control it, and they also lower the mounting points so the driveline stays at a workable angle after the truck is lifted. Drive shaft spacers play a similar role at the driveline, keeping the joint angles in range so vibration stays under control.
Lifting a pickup also changes how brake lines, sway bar links and steering parts sit, so check their routing after installation. Shocks, springs and bushings wear at different rates, so inspect them during regular service. If you plan to run larger tires, confirm wheel spacing and clearance at full steering lock before driving the truck hard off road.
Specifications
| Brand | Rough Country |
|---|---|
| Part number | R/C55531 |
| Lift kit | 4 inches |
| Shock series | N3 |
| Front shocks | N3 |
| Rear shocks | N3, large diameter body with chrome-hardened piston rod |
| Bushings | Long-lasting polyurethane |
| Rear lift component | Block and u-bolt |
| Tire size | 33 inches |
| Lift height range | 4 to 5.5 inches |
| Shocks included | Yes |
| Fitment type | Direct fit |
Vehicle fitment
It fits the 2015–2020 Ford F-150. Model years before 2015 and after 2020 are not covered, and the Ford Ranger and Super Duty trucks are not covered either.
F-150 model years before 2015 and after 2020 are not on the list, and the Ford Ranger and Super Duty trucks are not covered.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
Lifted knuckles, strut spacers, front and rear crossmembers, differential and sway-bar drop brackets, brake line brackets, a drive shaft spacer, fabricated rear blocks and N3 front and rear shocks.










