Overview
The Rough Country 6-inch Nissan Frontier suspension lift kit, part number R/C87930, fits the 2005–2019 and 2021 Nissan Frontier in the Desert Runner, LE, Nismo Off-Road, PRO-4X, S, SE, SL, SV and XE versions. It is a full lift kit that provides ride height for larger tires.
The kit includes beefy front and rear crossmembers, a durable skid plate and one-piece cast knuckles. Fabricated rear lift blocks complete the lift. The tire size for this kit is 285, and the lift height range is 6 to 7 inches.
The kit is designed to be minimally invasive and easier to install. It needs no welding or strut disassembly, and only minor cutting and drilling is required.
Fabricated rear lift blocks make room for larger tires once the lift is in place. Wheel offset affects clearance, so check it before mounting larger tires.
Key features
- Front and rear crossmembers
- Durable skid plate
- One-piece cast knuckles
- Fabricated rear lift blocks
- N3 nitrogen-charged shocks with 10-stage variable valving
- Lifetime replacement guarantee
Setting up a Frontier lift
A rear block lift moves the axle away from the frame, which raises the pinion angle and changes the driveshaft geometry. Rear lift blocks are a common way to gain ride height, but they often need a driveline check to keep vibration in check on the highway.
Front components also change, and cast knuckles sit at a new angle once installed. Check the tie rod and steering linkage for free movement and wear after the first trail runs. Upgrading to a larger tire usually means checking the wheel offset and fender clearance again.
Maintenance is simple but important. Re-torque the u-bolts and crossmember bolts after the first few drives, then check them at regular service intervals. Inspect the shock mounts for cracks or bent brackets when the truck is raised or lowered on a lift.
Specifications
| Brand | Rough Country |
|---|---|
| Part number | R/C87930 |
| Lift kit | 6 inches |
| Knuckles | One-piece cast |
| Front shocks | N3 |
| Rear shocks | N3 |
| Rear lift method | Block or spacer |
| Rear lift component | Block and u-bolt |
| Tire size | 285 |
| Lift height range | 6 to 7 inches |
| Shocks included | Yes |
| Fitment type | Direct fit |
Vehicle fitment
Fitment covers the 2005–2019 and 2021 Frontier, in the Desert Runner, LE, Nismo Off-Road, PRO-4X, S, SE, SL, SV and XE versions.
The 2020 Frontier model year is not on the list, and other Nissan models are not covered.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Only minor cutting and drilling is needed, and no welding or strut disassembly is required. The rear blocks change the rear axle position, so check the driveline angles after installation.
What’s included
Front and rear crossmembers, a skid plate, one-piece cast knuckles, rear fabricated lift blocks with u-bolts and N3 nitrogen-charged shocks.











