Overview
The Rough Country R/C55470 is a 6-inch radius arm suspension lift for the 2017–2022 Ford F-250 and F-350 Super Duty in King Ranch, Lariat, Limited, Platinum, XL and XLT versions. Radius arms replace the factory arms, and the kit allows up to 37-inch tires while keeping the factory ride quality.
Keeping suspension geometry close to factory angles helps preserve ride quality after a lift. The radius arms bolt into the factory mounts, which keeps the arm angle closer to the factory design and simplifies the installation.
Each radius arm weighs 27 lb. Clevite rubber bushings absorb vibration. The kit includes lifted coil springs and fabricated anti-wrap rear blocks that help prevent binding and axle wrap.
Key features
- Radius arms listed at 27 lb each
- Clevite rubber bushings for vibration absorption
- Radius arms that bolt into the factory mounts
- Lifted coil springs
- Fabricated anti-wrap rear blocks
- Choice of N3, V2 Monotube or Vertex Adjustable Reservoir shocks
Radius arm lift considerations
A radius arm lift changes how the axle is located, so the control arm angles and the front alignment both change. Radius arms take over the fore and aft location of the axle, which means the bushings and mounts carry more of the load during acceleration and braking. Rubber bushings can wear over time and should be inspected at service intervals for cracks, splits or looseness.
When choosing a shock option, think about how the truck is used. Heavier towing and frequent off-road driving put more demand on the shocks, while mostly highway use puts less. Coil springs and anti-wrap blocks work with the arms, so replacing them as a set keeps the suspension balanced. Check the front end and driveline angles after the first few drives, since small adjustments are often needed once everything settles.
- Inspect rubber bushings every service interval
- Re-torque mounting bolts after the first few trips
- Recheck the alignment after any suspension adjustment
Specifications
| Brand | Rough Country |
|---|---|
| Part number | R/C55470 |
| Lift size | 6 inches |
| Radius arm weight | 27 lb each |
| Radius arm bushings | Clevite rubber |
| Shock options | N3, V2 Monotube or Vertex Adjustable Reservoir |
| Tire clearance | Up to 37 inches |
| Lifetime warranty | Included |
| Fitment type | Direct fit |
Vehicle fitment
The kit fits 2017–2022 Ford F-250 Super Duty and 2017–2022 Ford F-350 Super Duty trucks in King Ranch, Lariat, Limited, Platinum, XL and XLT versions. F-150 models and Super Duty years before 2017 are not covered. Confirm fit for your vehicle’s year, model and trim before ordering.
The F-150 and the Ford Super Duty years before 2017 are not on the list. Other Ford models are not covered.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Radius arms change the control arm geometry, so the front alignment should be checked after installation. Confirm the driveline angles on a truck with a six-inch lift before driving off road.
What’s included
Radius arms, lifted coil springs, fabricated anti-wrap rear blocks and one of the three shock options the buyer chooses.









