Overview
The RockJock 4×4 Johnny Joint rear trac bar with housing bracket kit, part CE-9123N, is a rear trac bar for the 1997–2006 Jeep Wrangler (TJ) and the 2004–2006 Jeep Wrangler (LJ) Unlimited. A trac bar, also called a track bar, locates the axle side to side under the vehicle.
The rear unit pairs with RockJock’s front Johnny Joint trac bar and is designed to improve articulation on TJ and LJ models. The heavy duty trac arm relocation bracket bolts onto the rear axle housing and moves the trac bar pivot point, so the arm sits at the correct angle and position.
Key features
- 1-1/4 inch heavy wall 4130 chrome moly tubing
- 2 inch Johnny Joint rod ends at both ends
- Heavy duty trac arm relocation bracket
- Designed to pair with RockJock’s front Johnny Joint trac bar
Before you buy
A trac bar sets the axle’s side-to-side position, so the mounting points and joint angles matter as much as the tubing. Before buying, confirm the bracket and arm geometry suit your axle housing and steering linkage. When a front and rear unit are both planned, match the set so the axle stays centered through articulation.
Johnny Joints wear with use, especially on trail, so inspect the rod ends, bushings and hardware on a regular schedule. Play in a joint, cracked housings or bent arms are reasons to replace the part rather than adjust around it. Keep the rod ends greased if the design allows it.
- Check bolts and the relocation bracket after the first trail runs
- Look for play in the Johnny Joints
- Compare trac bar length against axle position
Specifications
| Brand | RockJock 4×4 |
|---|---|
| Part number | CE-9123N |
| Position | Rear |
| Tubing | 1-1/4 inch heavy wall 4130 chrome moly |
| Rod ends | 2 inch Johnny Joint, both ends |
| Housing bracket | Heavy duty trac arm relocation bracket |
Vehicle fitment
It fits the 2004–2006 Jeep Wrangler (LJ) Unlimited and the 1997–2006 Jeep Wrangler (TJ).
The list does not cover the Wrangler JK or JL, or the Grand Cherokee. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The relocation bracket bolts onto the rear axle housing and sets the trac arm at the correct angle. Check the axle centering after installation, since a trac bar changes the axle’s side-to-side position.
What’s included
The rear trac bar and the heavy duty trac arm relocation bracket with the housing bracket kit.









