Overview
The RockJock CE-9120FJL is an adjustable length front trac bar with Johnny Joint ends, for the 2018 to 2026 Jeep Wrangler JL and the 2020 to 2026 Jeep Gladiator. The bar has precise bends for fitting the JL and can be used on a stock JL, on a JL with its Off Road Suspension System, or anywhere in between. It fits the JL trims named below and the Gladiator in the Launch Edition, Mojave, Overland, Rubicon, Sport and Sport S trims.
The tube is 1.250-inch outside diameter 4130 chrome moly steel with a .250 wall. Each end has a greasable joint: a narrow Johnny Joint on the frame end and a heavy duty, high articulation joint on the housing end. The adjustable rod end has a 1-inch right hand thread with a jam nut, and rubber limiting washers are fitted on the frame end to keep the arm vertical without losing articulation.
Key features
- Adjustable length front trac bar
- 1.250-inch outside diameter 4130 chrome moly tubing
- Greasable narrow Johnny Joint on the frame end
- Heavy duty, greasable high articulation joint on the housing end
- Rubber limiting washers on the frame end
- Semi-gloss black powder coat with gold zinc plated Johnny Joint end
Choosing a front trac bar
A front trac bar controls side-to-side movement of the axle so the wheels stay centered under the body as the suspension travels. On a Wrangler or Gladiator that is lifted or fitted with larger tires, the stock arm position can let the axle drift, so an adjustable bar is often used to set the axle position correctly. Changing the length alters that centering, so check the setting with the vehicle at ride height after each adjustment and confirm the wheels track true.
Joints take the most wear on a trac bar. Grease the Johnny Joint and the high articulation housing joint at the intervals used for the rest of the front end, and look for play, torn boots or dry joints during routine service. Because the front trac bar works alongside the track bar, control arms and sway bar links, it is often inspected with them when the front suspension is upgraded.
- Check joint play by hand with the wheels off the ground
- Re-check bolts and the jam nut after the first few trail runs
Specifications
| Brand | RockJock 4×4 |
|---|---|
| Part number | CE-9120FJL |
| Position | Front |
| Tubing | 1.250-inch outside diameter, .250 wall, 4130 chrome moly |
| Frame end | Greasable narrow Johnny Joint |
| Housing end | Heavy duty, greasable, high articulation joint |
| Thread | 1-inch right hand, with jam nut |
| Fitment type | Direct fit |
| Vehicle | Jeep Wrangler JL, 2018 to 2026; Jeep Gladiator, 2020 to 2026 |
Vehicle fitment
It is a direct fit for the 2018 to 2026 Jeep Wrangler JL in the Rubicon, Sport and Sport S two-door trims and the Unlimited Moab, Unlimited Rubicon, Unlimited Sahara, Unlimited Sport and Unlimited Sport S four-door trims. It also fits the 2020 to 2026 Jeep Gladiator in the Launch Edition, Mojave, Overland, Rubicon, Sport and Sport S trims.
Earlier Wrangler generations are not on the list, and the rear trac bar is a separate part. Confirm your vehicle’s year, model and trim before ordering.
What’s included
One front trac bar with its Johnny Joint ends and limiting washers is included. Check the package contents against your installation before starting.







