Overview
The TeraFlex 4923200 is a TJ/LJ high steer front track bar kit for Jeep Wrangler TJ and LJ models, and it also fits the Cherokee XJ. It is used with the TeraFlex TJ/LJ High Steer Kit, where it lets you fine tune the drag link and track bar angles to help eliminate and correct bump steer and other front end issues.
The brackets have multiple mounting holes, so you can match lift height and track bar position. The aim is to set the track bar and drag link as close to parallel as possible. This kit requires cutting, welding and additional modifications.
Key features
- Multiple mounting holes in the brackets for fine tuning to lift height
- Aligns the track bar and drag link as close to parallel as possible
- Helps eliminate and correct bump steer and other front end issues
- Designed for use with the TJ/LJ High Steer Kit
Planning a high steer conversion
A high steer setup moves the steering linkage forward so the track bar and drag link can work at better angles on a lifted TJ or LJ. When those angles are off, the front end can steer unpredictably over bumps. Lining up the links is the main job, and the adjustable mounting holes help you do it.
Plan the full job before cutting. Confirm the steering components you have, mark bracket locations with the vehicle at ride height, and dry fit everything before welding. Good fabrication practice pays off here because the links carry steering loads.
After the conversion, check toe, look for bind through full steering lock, and inspect the welds and mounting points periodically. Watch for uneven tire wear or a wheel that pulls back toward center, since either can point to a link that needs another adjustment.
Specifications
| Brand | TeraFlex |
|---|---|
| Part number | 4923200 |
| UPC | 843885003304 |
| Mounting location | Front |
| Application | TJ/LJ high steer front end |
| Kit contents | Adjustable high steer front track bar (part 4923202), upper frame track bar bracket (part 1743031), lower axle track bar bracket (part 1943070) |
| Installation requirements | Cutting and welding required, additional modifications required |
Vehicle fitment
The manufacturer fitment list covers 1997 and 1999 to 2001 Jeep Cherokee (XJ) in several trims, 2004 to 2006 Jeep Wrangler (LJ) Unlimited and Unlimited Rubicon, and 1997 to 2006 Jeep Wrangler (TJ) in several trims.
The 1998 Cherokee XJ year is not in the list, and Grand Cherokee, YJ and JK models are not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Cutting and welding are required, and TeraFlex says additional modifications are needed. Choose the bracket mounting holes that match your lift height, then align the track bar and drag link before welding anything in place.
What’s included
This kit includes the adjustable high steer front track bar (part 4923202), the upper frame track bar bracket (part 1743031) and the lower axle track bar bracket (part 1943070).
Not included: the TJ/LJ High Steer Kit, which this track bar kit is designed to be used with.









