Overview
The Rock Krawler RKSRK07380B is a rear lower control arm in the X Factor series for the 2020–2026 Jeep Gladiator (JT). It is a tube-type arm with a Heims joint and is a direct-fit part for that vehicle.
Rock Krawler is a Made in the U.S.A. company that builds its suspension components in-house, and this arm is part of its Gladiator line.
Key features
- Rear lower position, tube type
- Heims joint design
- Direct fit for the 2020–2026 Jeep Gladiator (JT)
Heims joints and articulation
A Heims joint is a ball-and-race rod end that lets the arm pivot while holding its length. Because the joint carries the arm’s movement, its condition affects how the axle tracks over bumps and during articulation. Heims joints are commonly used where a tube arm needs a compact, adjustable-feeling pivot.
Inspect the joint by moving the arm by hand with the vehicle safely supported. Look for looseness, binding or rough movement, and check the threads and jam nut. Some joints can be greased or re-sealed, while others are replaced as a unit. Replace the joint when play or stiffness shows up, since a worn joint can make the axle feel loose.
Grit and water can work into the race, so rinse mud from the joint after hard use. Keep the jam nut torqued to specification and recheck it after the first few drives.
- Check for play with the wheels off the ground
- Recheck the jam nut after the first drives
Specifications
| Brand | Rock Krawler |
|---|---|
| Part number | RKSRK07380B |
| Position | Rear lower |
| Type | Tube |
| Joint design | Heims joint |
Vehicle fitment
It fits the 2020–2026 Jeep Gladiator (JT) across its trim lines.
It is built for the 2020–2026 Jeep Gladiator (JT). Before ordering, compare your Gladiator’s trim and year with the fit noted here.
Installation notes
Rear lower arms locate the axle, so check the driveline angles and alignment after the arm is installed.
What’s included
One rear lower control arm with a Heims joint.











