Overview
The Rock Krawler RKSRK07856 is a rear upper control arm in the Adventure Series for the 2020–2026 Jeep Gladiator (JT). It is a tube-type arm and a direct-fit part.
Rock Krawler is a Made in the U.S.A. company that builds its own components, and this arm is one of its Gladiator suspension parts.
Key features
- Rear upper position, tube type
- Adventure Series design
- Direct fit for the 2020–2026 Jeep Gladiator (JT)
Rear upper arm basics
Rear upper arms sit above the axle and work with the lower links to locate the axle housing. They help hold the pinion angle steady under acceleration and braking, so the driveline depends on these arms staying in position. A bent tube or worn bushing can let the axle shift under load, which often shows up as a clunk or a change in how the rear end tracks.
When a rear upper arm is replaced, check the other control arms and the mount points at the axle and frame. Inspect the tube ends for cracks and the bushings for splits or flattened rubber. Replacing parts that share the same load together helps keep the rear end geometry consistent, and a driveline check after installation is a good habit.
- Look for cracks near the tube ends
- Check bushings for splits or flattened rubber
- Re-check pinion angle after any lift change
Specifications
| Brand | Rock Krawler |
|---|---|
| Part number | RKSRK07856 |
| Position | Rear upper |
| Type | Tube |
Vehicle fitment
It fits the 2020–2026 Jeep Gladiator (JT) across its trim lines.
It is intended for the Gladiator JT, so the Wrangler JL and JK, and the TJ and LJ, fall outside its fit. Confirm fit for your vehicle’s year, model and trim before ordering.
Installation notes
Upper control arms set the pinion angle and axle location, so check the pinion angle after installation.
What’s included
One rear upper control arm.









