Overview
The ReadyLift 66-2215 is a 2.25-inch front leveling kit for the 2015–2019 Ford F-150. It raises the front of the truck through aluminum strut extensions so the front sits level with the rear. It is a leveling kit, not a full suspension lift.
ReadyLift designed this kit around the strut positioning of 2015 and newer F-150s, which differs from earlier trucks. It suits owners who want a level stance and room for slightly larger tires without replacing the factory springs. Only the front is lifted, and the kit is not for trucks that already have a factory or aftermarket front lift. The strut extensions are the only change to the front suspension, so the springs and the rest of the suspension stay as they came from the factory.
Key features
- CNC-machined billet aluminum strut extensions
- 2.25 inch of front lift from the strut extension design
- Smart Suspension Technology built for the 2015–2019 F-150 strut layout
- Front lift only, with no rear lift component
- Unfinished finish as supplied
Before you buy
A front leveling kit raises the front end so it sits even with the rear, which can improve stance and make room for slightly larger tires. Because it works on the front only, the rear keeps its factory height and the overall ride may feel a little different after installation. Plan on rechecking rear shock and bump stop clearance once the front is up, since the new front height changes how the suspension travels.
Most owners pair a leveling kit with a front alignment, because raising the front changes caster and camber settings. Inspect the brake lines, sway bar links and CV axle angles after installation, and recheck hardware torque after the first few drives. Look for uneven tire wear, clunks over bumps and unusual steering wander, which can point to a worn part or an alignment that needs adjustment.
- Check brake line length after raising the front
- Look for tire rub on full steering lock
- Recheck fasteners after the first few drives
- Inspect ball joints and boots at regular service intervals
Specifications
| Brand | ReadyLift |
|---|---|
| Part number | RDY66-2215 |
| Front lift height | 2.25 inch |
| Lift method | Strut extension (Smart Suspension Technology) |
| Rear lift | None, front lift only |
| Spacer material | Aluminum, CNC-machined billet |
| Finish | Unfinished |
| Shock relocation bracket | Not applicable |
| Track bar drop | Not included |
| Bump stops | None |
Vehicle fitment
It fits the 2015–2019 Ford F-150 in all of its trims, including XL, XLT, Lariat, King Ranch, Limited, Platinum, SSV and Police Responder.
The listed fitment covers only the 2015–2019 F-150. Earlier F-150 generations and model years after 2019 are not on the list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Before ordering, measure from the center of the front wheel hub to the bottom edge of the fender at the 12 o’clock position, using a plumb bob with the wheels pointing straight ahead. A measurement greater than 22 inch means the truck already has some factory front lift, and this kit is the wrong choice for that truck. The 66-2052 1.5 leveling kit is the part intended for that case. Using this kit on such a truck can cause upper control arm interference and excessive ball joint wear.











