Overview
The ReadyLift 66-1055 is a 2.25-inch front coil spacer for the 2006–2008 Dodge Ram 1500 2WD in the Laramie, SLT, SRT-10, ST, SXT and Sport trims. It sits on top of the factory coil spring and fits into the frame spring pocket, which ReadyLift says makes it a true coil spring spacer rather than a strut spacer.
The spacer has a CNC machined 6061-T6 aluminum spring mount fused to a polyurethane upper section, and it sits on top of the factory coil spring within the frame spring pocket. The design makes up part of the lift while keeping the factory ride. Custom bump stop brackets limit downward suspension travel and keep the distance within factory specifications. Machined shock stem extensions allow the factory shocks to be kept. Tires up to 35 inches in diameter fit with this kit, and the shock extensions work with factory shocks only.
Key features
- 2.25 inches of front lift
- Aluminum spring mount with polyurethane upper section
- Bump stop relocation brackets
- Machined shock stem extensions for factory shocks
- Tires up to 35 inches in diameter.
Coil spacer basics
A coil spring spacer sits between the factory coil spring and its upper perch, so it raises the front end without replacing the spring. Because the spring is still doing the work, the ride stays close to factory feel. The spacer needs a clean seat on both ends to keep the load even.
Changing the front height moves several parts out of their original positions. Bump stops, brake hoses, sway bar links and CV angles can all be affected, so these parts should be checked after the install. Shock length also matters, since a shock that is too short can limit travel and wear faster.
Inspect the bump stops and spacer mounts during routine service. Look for cracked rubber, shifted brackets or worn bushings, and replace any damaged part before the next trip off road.
- Check shock length against the new height
- Inspect bump stop rubber for cracks
- Recheck the alignment after installation
Specifications
| Brand | ReadyLift |
|---|---|
| Part number | RDY66-1055 |
| Type | Front coil spring spacer |
| Front lift | 2.25 inches |
| Rear lift | Front lift only |
| Spacer material | Aluminum spring mount with polyurethane upper section |
| Bump stops | Relocation brackets |
| Shock stem extensions | Included, for factory shocks only |
| Finish | Black |
| Fitment type | Direct fit |
Vehicle fitment
It is a direct fit for the 2006–2008 Dodge Ram 1500 2WD in the Laramie, SLT, SRT-10, ST, SXT and Sport trims.
It fits 2WD trucks only. Confirm fit for your vehicle’s year, model and trim before ordering, since 2009 models and the Ram 2500 and 3500 are not covered.
Installation notes
The shock stem extensions are for the factory shocks only, so aftermarket shocks need a different solution. The bump stop brackets are part of the install, and the alignment should be checked afterward.
What’s included
Front coil spacers, bump stop relocation brackets, shock stem extensions and the mounting hardware.









