Overview
The ReadyLift 66-3920 is a 2-inch front leveling kit for the 2019 Chevrolet Silverado 1500 and GMC Sierra 1500. It uses CNC machined 6061-T6 aluminum lower strut spacers with a 5-degree taper, which ReadyLift says is designed to work with the longer struts on the 2019 GM 1500 and avoid strut binding during installation.
The kit allows up to a 285/65-20 tire on a 20×9 wheel with 0 offset, or a 33×11.50 tire on a wheel with up to -12 offset. It includes four longer installation bolts and nuts along with instructions. The kit is not compatible with the Trail Boss and AT4 suspension packages. It fits both 2WD and 4WD models. The 2-inch lift suits the longer struts on the 2019 GM 1500, and the taper is designed for easy installation without strut binding.
Key features
- 2 inches of front lift
- CNC machined 6061-T6 billet aluminum
- 5-degree taper on the lower strut spacers
- Four longer installation bolts and nuts included
- Fits 2WD and 4WD models
Wheel offset and tire fit
Wheel offset decides how far the tire sits inside or outside the fender, so it matters as much as tire size when adding height. A lower offset pushes the tire outward and can reduce clearance at the strut, the fender lip and the steering stops. A higher offset keeps the tire tucked in but may need a different wheel choice for the brake caliper.
Once the truck is leveled, test the fit by turning the wheels to full lock and letting the suspension compress and extend. Look for contact with the fender liner, brake lines and inner wheel well. Adjust the tire choice before driving on the road if any contact appears.
- Test clearance at full lock and compression
- Check the fender liner for rub marks
- Confirm brake caliper clearance with the chosen wheel
- Recheck tire fit after changing wheels
Specifications
| Brand | ReadyLift |
|---|---|
| Part number | RDY66-3920 |
| Type | Front leveling kit with strut spacers |
| Front lift | 2 inches |
| Spacer material | 6061-T6 billet aluminum |
| Taper | 5 degrees |
| Maximum tire | 285/65-20 on 20×9 0-offset wheels, or 33×11.50 on wheels with up to -12 offset |
| Bump stops | None |
| Fitment type | Direct fit |
Vehicle fitment
It fits the 2019 Chevrolet Silverado 1500 in the Custom, High Country, LT, LTZ, RST, SSV and WT trims, and the 2019 GMC Sierra 1500 in the Base, Denali, Elevation, SLE and SLT trims.
The kit is not compatible with the Silverado Trail Boss or the Sierra AT4 suspension packages. The list does not cover the 2018 or 2020 trucks. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The lower strut spacers sit under the strut, and the longer bolts and nuts are included for the installation. The strut height changes, so have the alignment checked afterward.
What’s included
A pair of billet aluminum lower strut spacers, four longer bolts and nuts, and instructions.











