Overview
The ReadyLift 1.75 Inch Front Coil Spring Spacer Kit (part number 66-1918) is a front leveling kit for the 2019 Ram 2500 and 3500 4WD heavy-duty trucks. It adds 1.75 inches of front lift with top mount coil spring spacers.
The earlier 66-1113 kit often has fitment problems on the newer Ram chassis. This kit is designed for the 2019 Ram chassis changes.
Key features
- 1.75 inches of front leveling lift
- Heavy-duty laser-cut steel
- Powder-coated finish
- Top mount coil spring spacers
- Designed for the 2019 Ram chassis changes
Before you install
Top mount coil spring spacers raise the vehicle by sitting between the spring seat and the coil spring. Because the strut assembly is part of the job, the spring, strut mount and related hardware all need inspection while the front end is apart. Checking each mount surface before torquing the fasteners helps the spacers seat evenly.
A front leveling kit changes the geometry of the front suspension, so steering and driveline angles should be checked after the job. Tire size, steering stops and front shock length are the usual points to review. Many owners replace the front shocks or check the sway bar end links at the same time, since the new height changes how those parts operate.
Over time, coil springs can settle and lose height, and the rubber isolators under them can crack. Look for uneven ride height from side to side, worn bushings and fluid leaks around the shock. If the truck sits low on one corner after the spacers are in, recheck the seat and hardware before assuming the spacers are at fault.
Specifications
| Brand | ReadyLift |
|---|---|
| Part number | 66-1918 |
| Front lift | 1.75 inches |
| Front lift method | Top mount coil spring spacers |
| Material | Laser-cut powder-coated steel |
| Drive | 4WD |
| Fitment type | Direct fit |
Vehicle fitment
It fits the 2019 Ram 2500 (Big Horn, Laramie, Laramie Longhorn, Limited, Lone Star, Power Wagon and Tradesman) and the 2019 Ram 3500 (Big Horn, Laramie, Laramie Longhorn, Limited, Lone Star, SLT and Tradesman).
It is designed for 2019 Ram 4WD HD trucks only. Verify the year, model and trim match your truck before ordering.
Installation notes
The spacers are top mount, so the front strut assembly is involved in the install. Check the front alignment after the spacers are in.
What’s included
Laser-cut, powder-coated steel top mount coil spring spacers for the front.





