Overview
The Pro Comp 43 Series Sledge 17×9 wheel, part number PXA5143-7983, is a 17-inch aluminum spoke wheel that is 9 inches wide. It has a 6 on 5.5 bolt pattern and a satin black finish with milled accents, from the 43 Series Sledge line.
The wheel has a 125 center bore, a -6 offset and a backspacing of 4.5. It is low-pressure cast and rated for 2500 to 3650 lbs per wheel. It is universal fit and is not assigned to a vehicle.
Key features
- Low-pressure cast aluminum
- 17-inch diameter and 9-inch width
- 6 on 5.5 bolt pattern
- Center bore 125
- Offset -6 with backspacing 4.5
- Satin black with milled accents
Six-lug hub fit
Six-lug hubs are common on trucks and sport utility vehicles, and the bolt circle must match exactly for the wheel to seat. Before buying, measure the studs and confirm the center bore matches the hub. A bore larger than the hub can be used with hub-centric rings to center the wheel.
The negative offset with 4.5 backspacing puts the wheel face outward and reduces the room behind it. Caliper, inner fender and suspension clearance should be checked with the wheel mounted and the steering turned to both limits.
Tire fit follows the wheel. Width and diameter determine sidewall height and overall rolling size, so compare the tire with the original before ordering. Replacing worn lug nuts and studs when new wheels are fitted is a practical step that prevents loosening later.
- Measure stud spacing and center bore before mounting
- Check caliper and inner fender clearance at full lock
- Compare tire overall diameter with the original
- Replace worn or damaged lug nuts when fitting new wheels
Specifications
| Brand | Pro Comp Alloy Wheels |
|---|---|
| Part number | PXA5143-7983 |
| Wheel diameter | 17 inches |
| Wheel width | 9 inches |
| Bolt pattern | 6 on 5.5 |
| Center bore | 125 |
| Offset | -6 |
| Backspacing | 4.5 |
| Load rating | 2500 to 3650 lbs per wheel. |
| Style | Spoke |
| Finish | Satin black, milled |
| Construction | Aluminum |
| Series | 43 Series Sledge |
Vehicle fitment
This Sledge is not assigned to a vehicle and is universal fit. Measure the 6 on 5.5 hub and confirm the 125 center bore, then check the -6 offset against the brake caliper and the fender.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The 4.5 backspacing leaves less inner room than deeper wheels, so confirm caliper and suspension clearance with the wheel on the hub before driving.
The 125 center bore and 6 on 5.5 pattern must match the hub, and the 4.5 backspacing leaves a specific inner clearance to check. A 17-inch, 9-inch wheel with a -6 offset is a six-lug option, so confirm bolt holes before ordering.
What’s included
One 17×9 satin black wheel with milled accents is included. Match the package contents to your installation before starting.











