Overview
The Pro Comp PXA1069-6155 is a 16×10 polished aluminum wheel from the Pro Comp 69 Series Vintage line, with a Holes style face and a 5 on 150 bolt pattern. It is sold as one wheel with a center bore of 87 and an offset of -25.
The Vintage line uses low-pressure casting technology to build a light wheel with a durable finish. This 10-inch-wide rim has a backspacing of 4.5 and a high offset design intended for brake clearance on performance trucks and sport utility vehicles.
Key features
- Low-pressure cast aluminum construction
- Holes style face
- 16-inch diameter, 10-inch width
- 5 on 150 bolt pattern
- Center bore of 87
- Offset -25 with 4.5 backspacing
Heavy loads and trail use
Wheel load ratings matter once a vehicle carries gear, tows or runs on rough trails. Overloading a wheel can crack the spokes or fatigue the bead area over time, so the combined weight of the vehicle, passengers, cargo and tire should stay within the limits set for the vehicle and tire.
Off-road impacts are the main stress on a cast wheel. Hitting a rock or curb at an angle can bend the rim lip, and a bent lip often causes slow air loss that is easy to miss. Carry a tire repair kit, inspect the wheel after each trip and avoid repeated hard landings.
- Inspect the lip for dents after rock crawling
- Watch for slow air loss between drives
- Keep cargo within the vehicle’s limits
Specifications
| Brand | Pro Comp Alloy Wheels |
|---|---|
| Part number | PXA1069-6155 |
| Series | 69 Series Vintage (Classic) |
| Style | Holes |
| Construction | Aluminum |
| Finish | Polished |
| Diameter | 16 inches |
| Width | 10 inches |
| Bolt pattern | 5 on 150 |
| Center bore | 87 |
| Offset | -25 |
| Backspacing | 4.5 |
Vehicle fitment
No vehicle is named for this wheel, so it is not tied to a specific truck or Jeep. The 5 on 150 pattern and 87 center bore decide whether it mounts, and the -25 offset then needs a fender and caliper check.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Only a five-lug hub at 150 accepts this wheel, and the 87 center bore must seat on the hub. Test-fit the 10-inch rim with the tire mounted to confirm clearance at the brake caliper.
What’s included
One 16×10 aluminum wheel. Before installation, compare the delivered parts with the hub hardware you already have.











