Overview
The Pro Comp PXA1069-7985 is a 17×9 polished aluminum wheel from the Pro Comp 69 Series Vintage line, with a Holes style face and a 5 on 5.5 bolt pattern. It is sold as one wheel with a center bore of 72 and an offset of -6.
The Vintage alloys are made with low-pressure casting for a head-turning look with light weight. This polished wheel has a backspacing of 4.75. Its offset of -6 places the mounting face outside the centerline, so check fender and brake caliper clearance before mounting.
Key features
- Low-pressure cast aluminum construction
- Holes style face
- 17-inch diameter, 9-inch width
- 5 on 5.5 bolt pattern
- Center bore of 72
- Offset -6 with 4.75 backspacing
Fitting a larger wheel
Moving from a stock wheel to a 17-inch wheel changes tire choice, since a larger diameter usually means a lower-profile tire. Tire sidewall height affects ride comfort and the risk of curb damage, so check the load rating and tire size against the vehicle’s specifications. Wheel width also changes how the tire sits in the fender.
A -6 offset pushes the wheel outward, which can reduce inner clearance to suspension parts while adding outer clearance at the fender. Measure the fender gap at full steering lock. A wheel spacer is a common fix, but it adds load on wheel studs, so check the hub studs and spacer hardware carefully.
Balance the wheel and tire after mounting, and recheck the lug torque after the first few drives. Inspect the bead seat and rim edges for scuffs or bends when you rotate tires, since small damage can cause slow leaks.
Specifications
| Brand | Pro Comp Alloy Wheels |
|---|---|
| Part number | PXA1069-7985 |
| Series | 69 Series Vintage (Classic) |
| Style | Holes |
| Construction | Aluminum |
| Finish | Polished |
| Diameter | 17 inches |
| Width | 9 inches |
| Bolt pattern | 5 on 5.5 |
| Center bore | 72 |
| Offset | -6 |
| Backspacing | 4.75 |
Vehicle fitment
No vehicle is named for this wheel. Universal fit on the specifications does not tie the wheel to one model. Check the 5 on 5.5 hub and the 72 center bore first, then the -6 offset against the fender and brake caliper.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
A five-lug hub at 5.5 is the match for this wheel, and the 72 center bore must seat on the hub pilot. A test fit with the tire mounted shows whether the rim clears the caliper at full steering lock.
What’s included
One 17×9 polished aluminum wheel. Confirm the lug nut and center cap needs against your hub before starting the install.











