Overview
The Pro Comp 43 Series Sledge is a 20×9 alloy wheel in satin black with an 8×180 bolt pattern, from Pro Comp Alloy Wheels. The wheel is listed under part number PXA5143-2989 and is cast with low-pressure casting.
Alloys in this line carry load ratings of 2500 to 3650 lb per wheel. The wheel is not tied to a vehicle, so confirm the 8×180 bolt pattern, offset and hub bore against your vehicle before buying.
Key features
- Low-pressure cast alloy construction
- 20 inch diameter, 9 inch width
- 8×180 bolt pattern
- Satin black finish
- The wheel carries the Pro Comp Promise warranty, which is transferable.
Matching lug seats and hub fit
Alloy wheels need a lug nut seat that matches the wheel’s hole design. Before mounting, check that the nut type fits the wheel and that the seat is clean and undamaged. A mismatched seat can loosen under load, so this check matters as much as the bolt pattern itself. Use a torque wrench set to your vehicle’s value after the first few drives, since new nuts can settle.
Hub-centric rings are often used when the hub bore is larger than the wheel’s center bore. They fill the gap so the wheel centers on the hub instead of the studs. Choose rings that match both bore sizes, avoid stacking rings, and clean the hub face and wheel mounting surface before installing.
- Match lug nut seat type to the wheel
- Use hub-centric rings where the bore calls for them
- Clean mating surfaces before mounting
- Retorque after the first few drives
Specifications
| Brand | Pro Comp Alloy Wheels |
|---|---|
| Part number | PXA5143-2989 |
| Model | 43 Series Sledge |
| Diameter | 20 in |
| Width | 9 in |
| Bolt pattern | 8×180 |
| Finish | Satin black |
| Construction | Low-pressure cast alloy |
| Load rating | 2500 to 3650 lb per wheel, per the manufacturer |
Vehicle fitment
Confirm the 8×180 bolt pattern, offset and hub bore against your vehicle before ordering.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
One 20×9 wheel. Check the package contents against your installation before starting.











