Overview
The Kleinn Train Horns HK5 is a complete dual train horn package built around two Model 220 train horns with black ABS trumpets. It pairs them with a sealed 150 psi Model 6275 compressor and a 1.5 gallon air tank.
The Model 220 horns each use a separate mounting air horn with its own solenoid. The black trumpets have extra-wide bells for a locomotive-style blast that can be felt as well as heard. The kit covers horns, compressor, tank, wiring, tubing and switches.
Key features
- Dual Model 220 train horns with black ABS trumpets
- Extra-wide bells for a deep locomotive-style sound
- Each horn has its own solenoid
- Sealed 150 psi Model 6275 compressor
- 1.5 gallon air tank
- Cab switch, pressure switch and drain cock included
Choosing an air system setup
A train horn is only as good as the air behind it. Two horns draw more air per blast than a single trumpet, so the compressor and tank have to keep up when both sound together. A tank that empties quickly leaves the horns sounding weak on a second blast, which is why the tank and compressor are best considered as a pair. Pressure that drops during a run can also make the horns soften, so it helps to check the air system before adding anything else to it.
Mounting is the other constraint. Horns, compressor and tank all need clear space, and the air lines need a route that keeps them away from heat, moving parts and sharp edges. Think about where the drain cock sits so moisture can be drained from the tank. Wiring each solenoid separately keeps the horns independent if one circuit ever needs checking.
- Mark mounting spots for both horns before drilling
- Keep air lines clear of exhaust and moving parts
- Drain the tank regularly to clear moisture
- Inspect fittings for leaks with soapy water after installation
Specifications
| Brand | Kleinn Train Horns |
|---|---|
| Model | HK5 kit |
| UPC | 70000561581 |
| Horn model | Model 220 dual train horns |
| Trumpet material | Black ABS, extra-wide bells |
| Compressor | Model 6275, sealed |
| Maximum pressure | 150 psi |
| Air tank | 1.5 gallon |
| Solenoids | One per horn |
| Fitment type | Universal fit |
Vehicle fitment
Fitment is given only as universal, with no specific year, make or model.
Confirm mounting space for two horns, the compressor and the tank before ordering.
Installation notes
Both horns have their own solenoid, so both need wiring to the switch. The kit includes wiring, switches and a pressure switch for the air system.
What’s included
Model 220 dual train horns, Model 6275 compressor, 1.5 gallon air tank, tubing, cab switch, pressure switch, safety valve, compression fitting, drain cock, remote mount intake filter, and mounting brackets with hardware.




















