Overview
The King Shocks OEM Performance Series front 2.5 remote reservoir shock set, part number KST25001-351, fits the 1990 to 1997 Toyota Land Cruiser in the Base trim. It is built for 3 to 5 inch lifts and has 2.5-inch bodies, a monotube reservoir shock type, a front location and gas charged construction.
King builds its OEM upgrade kits as bolt-on suspension systems using the same materials and tight tolerances as its high end race shocks. The kits arrive complete and install without cutting or welding. They suit stock vehicles, or custom lengths can be used on lifted aftermarket suspensions.
The large 2.5-inch shock bodies and external reservoirs add fluid capacity and heat dissipation, which supports steady damping under hard use. Valves adjust with simple hand tools, using the same serviceable design as King’s race shocks.
Key features
- 2.5-inch shock bodies with external reservoirs
- Adjustable front ride height
- Up to 25 percent more front wheel travel.
- Valve adjustment with simple hand tools
- Bolt-on installation with no cutting or welding
- Custom length option for lifted vehicles
Choosing a lift height
Lift height drives almost every choice in a shock setup. Shock length, spring rate and bump stop position all depend on how far the body has been raised. A shock that is too short can bottom out on the bump stop, while one that is too long can limit droop and stress the mounts. Measure the current ride height and compare it to the lift range before deciding on a length.
Shocks and springs work as a pair. When the suspension is raised, the shock needs to reach its full travel without binding. Remote reservoir designs add fluid capacity, which helps on long descents and in rough terrain, but it does not change the need for correct length. Check your bump stops and brake lines after a lift, since both can be affected by the new geometry.
- Measure current ride height before choosing length
- Check bump stop position after the lift
- Inspect brake lines and sway bar links for clearance
Specifications
| Brand | King Shocks |
|---|---|
| Part number | KST25001-351 |
| Shock series | 2.5 Remote Reservoir |
| Shock type | Monotube reservoir |
| Body diameter | 2.5 inches |
| Lift range | 3 to 5 inches |
| Hydraulic or gas charged | Gas charged |
| Location | Front |
| Fitment type | Direct fit |
| Vehicle | Toyota Land Cruiser, 1990 to 1997, Base |
Vehicle fitment
It is a direct fit for the 1990 to 1997 Toyota Land Cruiser in the Base trim.
Other Land Cruiser years and trims, and other Toyota models, are not on the list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Installation is bolt-on with no cutting or welding. Valve settings can be changed after fitting using simple hand tools.
What’s included
The kit arrives complete. Check the hardware and contents against your installation before starting.









