Select your vehicle

King Shocks 2.5 OEM Performance Series – Rear – Remote Reservoir Shock Absorber for 3 – 4″ Lifts – 25001-312

King Shocks

Shop on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Rear remote reservoir shock from the King 2.5 OEM Performance Series, for 3 to 4 inch lifts
  • Fits the 1984 to 2001 Jeep Cherokee XJ
  • Custom tuned with bolt-on installation at stock height or with custom kits
  • Part number KST25001-312

Description

Overview

The King Shocks 25001-312 is a rear remote reservoir shock from the 2.5 OEM Performance Series, sized for 3 to 4 inch lifts. It fits the 1984 to 2001 Jeep Cherokee XJ as a direct fit, and it is gas charged.

The shock is custom tuned for the Jeep, with the damping curve and spring rate set through real-world testing. It is designed for a bolt-on installation at stock height, and custom kits are available for XJs running lifted aftermarket suspensions.

Remote reservoir shock basics

A remote reservoir shock moves the gas and oil reservoir away from the shock body, which gives the damper more fluid volume and surface area for cooling. This layout is common on trucks and SUVs used for towing, trail driving or longer runs over rough ground. The reservoir hose needs room to move through suspension travel without rubbing the tire, frame or bracket.

Gas charged shocks keep the oil under pressure, which helps reduce foaming during hard use. When choosing a rear shock, match the body size, mounts and lift range to the truck’s setup. Stock-height installs and lifted setups do not always use the same shock length, so confirm the intended ride height first. Inspect the mounts and bushings during each service, and replace worn parts before they cause uneven wear or noise.

Specifications

Brand King Shocks
Part number KST25001-312
Shock series Performance Series, 2.5 OEM
Shock type Remote reservoir
Lift range 3 to 4 inch lifts
Hydraulic or gas charged Gas charged
Location Rear
Fitment type Direct fit
Vehicle Jeep Cherokee XJ, 1984 to 2001

Vehicle fitment

It fits the 1984 to 2001 Jeep Cherokee XJ in the Base, Briarwood, Chief, Classic, Country, Laredo, Limited, Pioneer, SE and Sport trims.

Other Cherokee generations and Jeep models are not on the list. Confirm your vehicle’s year, model and trim before ordering.

What’s included

Check the kit contents and quantity against your installation before starting.

Fitment

VehicleYearsTrims
Jeep Cherokee (XJ)1984–2001Base, Briarwood, Chief, Classic, Country, Laredo, Limited, Pioneer, SE, Sport

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

Does this King shock fit a 2001 or newer Cherokee?

No. It fits the 1984 to 2001 Jeep Cherokee XJ only, so later Cherokee models are not covered. Confirm your Cherokee's year and trim before choosing this rear remote reservoir shock.

What lift is the 25001-312 designed for?

It is built for 3 to 4 inch lifts. The rear remote reservoir design pairs with the lifted setups it is made for, and custom kits are available for XJs running lifted aftermarket suspensions.

Is this shock a remote reservoir design?

Yes. The shock is a rear remote reservoir design, with the reservoir mounted separately from the shock body. The 2.5 OEM Performance Series uses this layout for its gas charged construction.

Does a remote reservoir shock need extra service?

Inspect the reservoir hose and mounts for rubbing and leaks during regular service. Keep the gas charged construction in mind when checking for leaks, and replace seals or the shock if oil loss or noise appears.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop on Amazon