Overview
The ICON Ford F-150 Billet Upper Control Arm with Delta Joint Kit, part number 98507DJ, is a front upper billet kit for the 2021 to 2026 Ford F-150. It fits King Ranch, Lariat, Limited, Platinum, Police Responder, SSV, Tremor, XL and XLT trims.
The arms correct front end geometry, add adjustable camber and caster, and improve suspension component clearance. They are CNC machined from 6061 billet aluminum, a lightweight material with high strength.
The included ICON Delta Joint replaces the OE ball joint, which ICON says allows full bump and droop travel without bind. FK rod end heim joints give smooth function through the travel range, and ICON’s double adjuster sleeve allows camber and caster to be adjusted on the vehicle.
The Delta Joint is a heavy duty high angle ball joint with a zinc plated housing, a grease seal and a greasable design. It combines ball joint durability with uniball flexibility and is built to be more robust than a uniball.
The kit fits OEM wheels and tires. Wheels in 17 in. by 8.5 in. with 5 in. backspacing and 6 mm offset are suited to this kit, as are 18 in. by 9 in. and 20 in. by 9 in. wheels at matching backspacing and offset.
Key features
- CNC machined 6061 billet aluminum
- ICON Delta Joint, included
- FK rod end heim joints
- Double adjuster sleeve for camber and caster
- Fits OEM wheels and tires.
Wheel and tire planning
Wheel offset and backspacing decide where the tire sits relative to the upper arm and the frame. Changing either one can alter clearance, especially at full lock and over bumps. On a truck with a billet upper arm, a tire that is close to the arm can start to rub once the suspension settles or the alignment changes.
Tire size also matters. A taller or wider tire changes the load on the front joints and the steering geometry, so check the arm position and clearance after any tire change. Camber and caster adjustments made with the sleeves can offset small clearance changes, but they do not add room for a larger tire.
- Confirm offset and backspacing before mounting
- Check clearance at full lock
- Recheck alignment after a tire size change
- Watch for rubbing marks on the inner fender
Specifications
| Brand | ICON Vehicle Dynamics |
|---|---|
| Part number | 98507DJ |
| Position | Front upper |
| Material | 6061 billet aluminum |
| Joint | ICON Delta Joint |
| Adjustment | Double adjuster sleeve, on the vehicle |
| Headlamp note | Dynamic bending headlamps need part 611071 |
| Not compatible | Continuous control damping (CCD) trucks |
| Fit | Direct fit |
Vehicle fitment
It fits 2021 to 2026 Ford F-150 models, including King Ranch, Lariat, Limited, Platinum, Police Responder, SSV, Tremor, XL and XLT trims.
Other F-150 model years, and trucks with continuous control damping, are not in this fitment. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Set camber and caster with the adjuster sleeves after installation, then have the alignment checked. Trucks with dynamic bending headlamps need part 611071.
What’s included
The billet upper control arm kit with the Delta Joint. Part 611071 is not included in the kit.

