Overview
The ICON Billet Upper Control Arm Kit, part number 218560DJ, is a front upper billet kit for Ram 1500 trucks. It fits 2019 to 2026 Ram 1500 models in the Big Horn, Laramie, Laramie Longhorn, Limited, Lone Star, Rebel and Tradesman trims. It does not fit 2019 Ram 1500 Classic models or 2020 and later TRX trims.
The kit corrects front end geometry, adds adjustable camber and caster, and improves suspension component clearance. The arms are CNC machined from 6061 billet aluminum in a hybrid H-beam cross section, which is light and resists bending better than tubular arms.
The factory ball joint is replaced with the patented Delta Joint, which allows full bump and droop travel without bind. FK 3/4 in. rod end heim joints give smooth function through travel, and the double adjuster sleeve sets camber and caster on the vehicle.
The Delta Joint is a heavy duty high angle ball joint with a zinc plated housing, a tough grease seal and a greaseable design. It combines ball joint durability with uniball articulation.
The arms fit with OEM wheels and tires. The recommended tires are 35 in. by 12.50 in., and that size requires fender trimming and modifications.
Key features
- CNC machined 6061 billet, hybrid H-beam cross section
- ICON patented Delta Joint in place of the OE ball joint
- FK 3/4 in. rod end heim joints
- Double adjuster sleeve for camber and caster
- Fits OEM wheels and tires.
Planning a bigger tire build
Running larger tires changes how the front suspension and steering move, so plan the whole build before buying parts. Bigger tires add load to the joints and can rub at full steering or full compression. Check the fender and inner liner clearance with the wheels you plan to use, along with the steering stops and driveline angles.
Billet upper arms help set geometry for a lifted or larger-tire truck, but the lower arms, shocks and steering components still matter. Inspect the joints regularly, grease them on schedule and confirm the alignment after any change in ride height. Keep notes on the setup so a future repair can match the original build.
- Check fender and liner clearance
- Review steering stops and driveline angles
- Inspect joints after tire changes
Specifications
| Brand | ICON Vehicle Dynamics |
|---|---|
| Part number | 218560DJ |
| Position | Front upper |
| Material | 6061 billet aluminum, hybrid H-beam |
| Joint | ICON Delta Joint, patented |
| Frame side | FK 3/4 in. rod end heim joint |
| Recommended tires | 35 in. x 12.50 in., fender trimming required |
| Fit | Direct fit |
Vehicle fitment
It fits 2019 to 2026 Ram 1500 models in the Big Horn, HFE, Laramie, Laramie Longhorn, Limited, Limited Longhorn, Lone Star, Longhorn, Rebel, Special Service and Tradesman trims.
Ram 1500 Classic models from 2019 and TRX trims from 2020 are excluded by the tech note, and Ram 2500 and 3500 trucks are not in this fitment. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Set camber and caster with the adjuster sleeves once the arms are on. Plan on fender trimming if you run the recommended 35 in. tires.
What’s included
The billet upper control arm kit with the components and hardware ICON describes as needed for a complete install.




