Overview
The ICON 48500DJ is a front upper billet kit for the 2021 to 2026 Ford Bronco. It fits the Badlands, Base, Big Bend, Black Diamond, First Edition, Outer Banks and Wildtrak trims. The kit improves front end geometry with adjustable camber and caster and better component clearance.
The arms are CNC machined from 6061 billet aluminum in a hybrid H-beam cross section. ICON describes them as light weight and better at resisting bending than tubular arms. The kit includes the components and hardware ICON says are needed for a complete install.
The Delta Joint PRO replaces the OE ball joint in this kit. It is serviceable and rebuildable, so any component can be removed, inspected and replaced without buying a whole new joint.
The Delta Joint PRO has a larger ball with 56% more bearing surface than the standard Delta Joint and a full 90 degrees of articulation from one extreme to the other. That is a 14% gain in range of motion over the original Delta Joint. The ball and shaft are chromoly, the bearing surface is hardened to Rockwell C 55, and the replaceable races are graphite-impregnated sintered metal.
The lubrication system distributes grease through channels without extending past the bearing seal. Recommended wheels are 17 in. by 8.5 in. with 4.75 in. backspacing and 0 mm offset, and recommended tires are 35 in. by 12.50 in.
Key features
- CNC machined 6061 billet aluminum
- Serviceable, rebuildable Delta Joint PRO
- Full 90 degrees of articulation from one extreme to the other
- Chromoly ball and shaft; graphite-impregnated races
- FK 3/4 in. rod end heim joints at the frame
- Double adjuster sleeve for on-vehicle camber and caster
Before you buy
Upper control arms locate the top of the axle and control how the wheel moves through suspension travel. When they are replaced, the geometry they set, including camber and caster, changes, which is why an upgraded upper arm is usually paired with an alignment. Shoppers comparing billet arms should look at how the arm mounts to the frame, the type of joint used at the axle end, and how easily the joint can be inspected later.
Joint design matters over time. A serviceable joint can be greased, inspected and rebuilt, which helps when off-road use puts repeated load on the axle end. Worn joints often show play when the wheel is rocked at the top and bottom, a clicking or popping noise over bumps, or uneven tire wear along one edge. Checking these points during tire rotations makes it easier to catch a problem early.
Wheel and tire size also affects how much room the arm and joint need. Larger tires and wheels with different backspacing can change clearance near the upper arm and the frame. Before buying, check fit against your vehicle’s year, model and trim, and plan for a full alignment once the work is complete.
- Inspect the joint for play at every tire rotation
- Recheck clearance after any wheel or tire change
- Plan for an alignment after the arms are installed
Specifications
| Brand | ICON Vehicle Dynamics |
|---|---|
| Part number | 48500DJ |
| Position | Front upper |
| Material | 6061 billet aluminum |
| Joint | Delta Joint PRO, serviceable |
| Articulation | 90 degrees |
| Recommended wheels | 17 in. x 8.5 in., 4.75 in. backspacing, 0 mm offset |
| Recommended tires | 35 in. x 12.50 in. |
| Fit | Direct fit |
Vehicle fitment
It fits 2021 to 2026 Ford Bronco models, including Badlands, Base, Big Bend, Black Diamond, First Edition, Outer Banks and Wildtrak trims.
Bronco Sport models and Bronco years before 2021 are not in this fitment. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Camber and caster are set on the truck with the adjuster sleeve, so plan for an alignment once the arms are in place.
What’s included
The billet upper control arm kit with its hardware, as ICON describes.



