Overview
The ICON Delta Joint Tubular Upper Control Arm Kit, part number 98500DJ, is a front upper tube arm kit for the Ford F-150. It fits 2004 to 2020 F-150 models in the trims covered here, along with 2014 to 2020 Expedition, 2014 to 2017 Expedition EL and 2018 to 2020 Expedition Max models. The F-150 and Expedition trims are covered separately, so check the trim you have.
The arms are CNC bent from 1026 DOM steel tubing with a semi-gloss black powder coat for strength and corrosion resistance. Built-in caster correction supports alignment settings.
The arms can increase wheel travel when paired with 2.5 series coilovers, which improves performance and ride quality. Those coilovers are not part of this kit.
The Delta Joint is a patent pending heavy duty high angle ball joint with a zinc plated housing, a tough grease seal and a greasable design. It has metal on metal construction for longevity and quiet running.
Key features
- CNC bent 1026 DOM steel tubing
- Semi-gloss black powder coat
- Built-in caster correction.
- Patent pending Delta Joint
- Zinc plated housing and grease seal
Ford truck upper arm checks
Upper control arms on a full-size Ford truck work with the front springs and shocks to keep the wheels in position through bumps and braking. Heavy loads, towing and off-road use all put extra stress on the joints and the frame mounts. A worn joint or mount can change the caster and camber, so the arm replacement is a good time to inspect the rest of the front end.
Tubular arms suit owners who want steel strength at a lower cost than billet. Because the arms carry built-in caster correction, the alignment should be verified before the truck is driven hard. Look for uneven tire wear and wandering after the install, since these often point to an issue with the setup.
- Inspect lower arms, ball joints and mounts
- Check tire wear after installation
- Confirm alignment before towing or hard use
- Look for wandering or pulling
Specifications
| Brand | ICON Vehicle Dynamics |
|---|---|
| Part number | 98500DJ |
| Position | Front upper |
| Type | Tube |
| Material | 1026 DOM steel |
| Finish | Semi-gloss black powder coat |
| Joint | ICON Delta Joint, patent pending |
| Fit | Direct fit |
Vehicle fitment
It fits 2004 to 2020 Ford F-150 models, including FX2, FX4, Harley-Davidson Edition, King Ranch, Lariat, Limited, Platinum, STX, XL and XLT trims. It also fits 2014 to 2020 Ford Expedition, 2014 to 2017 Expedition EL and 2018 to 2020 Expedition Max models.
Ford Raptor and other Ford trucks are not in this fitment. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The arms set front geometry with built-in caster correction, so check the alignment before the truck is driven hard. Installation steps are not covered here, so use a procedure suited to upper arm replacement.
What’s included
Tubular upper control arm kit. The coilovers are not included.


