Overview
The ICON Ford Raptor Delta Joint Billet Aluminum Upper Control Arm Kit, part number 98562DJ, is a front upper billet kit for the Ford F-150 Raptor and SVT Raptor. It fits 2010 to 2014 and 2017 to 2020 F-150 models with the Raptor and SVT Raptor trims. The 2015 and 2016 model years are not covered.
The kit corrects front end geometry, adds adjustable camber and caster, and improves suspension component clearance. The arms are CNC machined from 6061 billet aluminum, a light weight material.
The Delta Joint replaces the factory ball joint and allows full bump and droop travel without bind. FK 7/8 in. rod end heim joints provide smooth function through the travel range. An adjuster sleeve sets camber and caster on the truck.
The Delta Joint is a patent pending heavy duty high angle ball joint with a zinc plated housing, a grease seal, metal on metal construction and a greasable design. It combines ball joint durability with uniball articulation.
Key features
- CNC machined 6061 billet aluminum
- ICON patent pending Delta Joint in place of the OE ball joint
- FK rod end 7/8 in. heim joints
- Double adjuster sleeve for on-vehicle camber and caster
- Hardware for a complete install included.
Billet arm ownership notes
Billet control arms are machined from solid aluminum, so their fit and finish depend on tight tolerances at the pivots. The heim joints and the Delta Joint carry the load at each end of the arm, which means their condition matters more than the arm body itself. Check the joints at regular intervals for play, dust boot damage and binding, especially on a truck used off road.
Adjustable camber and caster are handy on a truck that sees changing loads, but each change moves the tire’s position. Recheck tire clearance at full lock and at full compression after any adjustment. Keep track of the sleeve settings so you can return to a known setting after service, and have a shop verify the alignment before a long trip.
- Inspect heim joints for play and binding
- Check dust boots and grease seals for damage
- Recheck tire clearance after sleeve changes
- Keep a record of the camber and caster settings
Specifications
| Brand | ICON Vehicle Dynamics |
|---|---|
| Part number | 98562DJ |
| Position | Front upper |
| Material | 6061 billet aluminum |
| Joint | ICON Delta Joint, patent pending |
| Frame side | FK 7/8 in. rod end heim joint |
| Adjustment | Double adjuster sleeve, on the vehicle |
| Fit | Direct fit |
Vehicle fitment
It fits 2010 to 2014 and 2017 to 2020 Ford F-150 models with Raptor and SVT Raptor trims.
The 2015 and 2016 Raptor model years and other F-150 trims are not in this fitment. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Set camber and caster with the adjuster sleeves once the arms are installed, then have the alignment checked. The kit includes the hardware needed for a complete install.
What’s included
The billet upper control arm kit with the components and hardware ICON describes as needed for a complete install.




