Overview
The ICON Delta Joint Tubular Upper Control Arm Kit, part number 78600DJ, is a front upper tube arm kit for GM trucks and SUVs. It fits 2007 to 2016 Silverado 1500 and Sierra 1500 models, 2011 to 2018 Silverado and Sierra 2500 HD and 3500 HD models, 2007 to 2016 Tahoe and Yukon, and the Suburban and Yukon XL years covered below.
The arms are CNC bent from 1026 DOM steel tubing and finished with a semi-gloss black powder coat for strength and corrosion resistance. Built-in caster correction supports alignment and steady handling on the road.
Paired with 2.5 series ICON coilovers, the arms can add wheel travel on 2007 to 2016 GM 1500 trucks, which supports better performance and ride quality. The coilovers are a separate purchase and are not part of this kit.
The arms use a patent pending Delta Joint with a zinc plated housing and a grease seal. The joint is greasable and built with metal on metal construction to reduce wear and keep daily driving quiet.
Key features
- CNC bent 1026 DOM steel tubing
- Semi-gloss black powder coat
- Built-in caster correction.
- Patent pending Delta Joint
- Zinc plated housing with grease seal
- Greasable design
Heavy duty GM truck use
Full-size GM trucks and SUVs carry heavy loads, and the upper arms take braking and cornering forces where they meet the frame. Heavy duty trucks put extra strain on the joints, so check them more often if you tow or haul. Before buying, consider the truck’s weight rating and the brake and tire setup, since those affect how hard the arms work.
Grease the joint at the interval you use for other chassis points, and wipe the dust boot clean before greasing. Inspect the coating for chips, since bare steel rusts quickly in road salt. A worn joint often shows up as clunking over bumps or uneven tire wear on the inside edge of the tire.
- Grease joints at each chassis service
- Check the coating for chips after rough use
- Replace joints that show play
Specifications
| Brand | ICON Vehicle Dynamics |
|---|---|
| Part number | 78600DJ |
| Position | Front upper |
| Type | Tube |
| Material | 1026 DOM steel |
| Finish | Semi-gloss black powder coat |
| Joint | ICON Delta Joint, patent pending |
| Fit | Direct fit |
Vehicle fitment
It fits 2007 to 2016 Chevrolet Silverado 1500 and GMC Sierra 1500 models, 2011 to 2018 Silverado and Sierra 2500 HD and 3500 HD models, 2015 to 2016 Chevrolet Suburban and GMC Yukon XL, 2007 to 2014 Suburban 1500 and Yukon XL 1500, and 2007 to 2016 Tahoe and GMC Yukon models, in the trims this kit covers.
Silverado and Sierra models from 2017 onward, and other GM trucks, are not in this fitment. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Because the arms carry built-in caster correction, schedule an alignment once they are installed. Make sure your truck’s year, model and trim are covered before buying.
What’s included
Tubular upper control arm kit.


