Overview
The ICON Delta Joint Billet Upper Control Arm Kit, part number 58560DJ, is a billet aluminum upper control arm kit for the 2007 to 2021 Toyota Tundra. It fits the trims covered here, including 1794 Edition, Base, Limited, Nightshade, Platinum, SR, SR5, TRD Pro and Trail.
The arms are CNC machined from 6061 aluminum and matte anodized for strength and corrosion resistance. The PTFE-lined rod ends and machined adjuster sleeves allow alignment to be set on the vehicle, which helps tune caster and camber.
The extra droop travel from these arms supports better performance and ride quality on the Tundra. Extended travel coilovers are not part of this kit. Because the Delta Joint is greasable, it needs periodic greasing; follow the maintenance guidance for the joint.
The Delta Joint is a patent pending high angle ball joint with a zinc plated housing, a grease seal and a greasable design. It has metal on metal construction, which supports longevity and quiet operation.
Key features
- CNC machined 6061 billet aluminum
- Matte anodized finish
- PTFE-lined rod ends
- Machined adjuster sleeves for on-vehicle alignment
- ICON patent pending Delta Joint
- Greasable design
Greasing and alignment after install
Billet upper arms with greasable joints need a simple routine to stay quiet and tight. Grease the joint at intervals that match your driving, and more often after off-road trips or water crossings. Check the grease seal at the same time, since a torn seal lets grit into the joint and speeds wear.
Adjuster sleeves make it possible to set caster and camber once the arms are on the truck, but that work should be followed by a full alignment check. Recheck the settings after the first few drives, and inspect the joints again once the truck has seen rough use.
- Grease joints at intervals suited to your use
- Inspect grease seals for tears
- Recheck alignment after the first drives
- Check joints after water crossings
Specifications
| Brand | ICON Vehicle Dynamics |
|---|---|
| Part number | 58560DJ |
| Position | Front upper |
| Material | 6061 billet aluminum |
| Finish | Matte anodized |
| Joint | ICON Delta Joint, patent pending |
| Adjustment | On the vehicle, via adjuster sleeves |
| Fit | Direct fit |
Vehicle fitment
It fits 2007 to 2021 Toyota Tundra models, including 1794 Edition, Base, Limited, Nightshade, Platinum, SR, SR5, TRD Pro and Trail trims.
Tundra trims not named in the fitment, and other Toyota models, are not in this fitment. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Use the adjuster sleeves to set the arms for alignment once they are on the vehicle. Installation steps are not covered here, so follow a procedure suited to upper arm replacement.
What’s included
Billet upper control arm kit.




