Overview
The ICON Vehicle Dynamics 614561 is a Delta joint retrofit kit for front upper control arms that use a 1-inch uniball. It is made for non-ICON arms on Toyota 4Runner, FJ Cruiser and Land Cruiser models and the Lexus GX460 and GX470.
The kit is lubeable, so grease can be added to the joint during routine front suspension maintenance. It is made for 2007 and later FJ Cruiser, 2003 and later 4Runner, and 2008 and later Land Cruiser (200 Series) applications that use non-ICON upper control arms.
Key features
- Retrofit for non-ICON upper control arms
- 1-inch uniball joint
- Front upper position
- Lubeable
Retrofit upper arm considerations
Upper control arms guide the wheel’s movement and carry load through the ball joint, so a retrofit joint has to match the arm’s bore and fit tightly. Before fitting, confirm the arm takes a 1-inch uniball and that the press and tooling suit the arm. Have the alignment checked afterward, since changing the upper arm joint can shift camber and caster slightly.
Retrofit joints tend to wear where grit gets past the seals, so grease them on the schedule you keep for other suspension points. Look for play, torn boots or dry, cracked grease at the joint during tire rotations. If you run a lift or larger tires, expect the joint to see more angle and load, and inspect it more often.
Specifications
| Brand | ICON Vehicle Dynamics |
|---|---|
| Part number | ICO614561 |
| Position | Front upper |
| Joint size | 1-inch uniball |
| Arm type | Non-ICON upper control arms |
| Lubeable | Yes |
Vehicle fitment
It fits the following vehicles:
- 2003–2009 Lexus GX470 and 2010–2023 Lexus GX460
- 2003–2023 Toyota 4Runner, in SR5, Limited, TRD Off-Road, TRD Pro and Venture versions
- 2007–2014 Toyota FJ Cruiser
- 2008–2011 and 2013–2021 Toyota Land Cruiser
Tacoma, Tundra and Silverado models are not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
This is a retrofit kit for non-ICON upper control arms. The arm must accept a 1-inch uniball, so check the arm before ordering the kit.
What’s included
The kit is a retrofit for non-ICON upper control arms with a 1-inch uniball, so the arm must accept that joint size. Check the package contents against your installation before starting.








