Overview
The Fabtech FTS1599-6-1 is an upper ball joint, part number FABFTS1599-6-1, for performance axle and suspension builds. It is built to handle the stress and abuse found in performance vehicles. The joint is lubeable and works with the Fabtech Control Arm and Spindle lift system.
No vehicle years, makes or models are named for this upper ball joint. Fabtech marks it universal fit, which does not confirm a match for any particular truck or Jeep, so compare it with your existing control arm and spindle parts before ordering.
Key features
- Upper ball joint position
- Lubeable design, so it can be serviced with grease
- Built for the stress of performance vehicles
- Stated to work with the Fabtech Control Arm and Spindle lift system
Signs of a worn joint
An upper ball joint carries the weight of the knuckle and lets it pivot, so wear shows up as wandering, vibration, or uneven tire wear on the front. A worn joint often feels loose when you lift the wheel off the ground and rock it by hand. Performance builds that run higher loads or aggressive articulation can wear joints sooner, so inspect them on a regular schedule.
Upper joints in control arm and spindle setups are checked alongside the lower joint, bushings and steering components. Replacing a single joint without checking the rest of the front end can leave the new part working against worn parts.
- Look for torn or split grease boots
- Check for play with the wheel off the ground
- Note uneven tire wear across the front tread
Specifications
| Brand | Fabtech |
|---|---|
| Part number | FABFTS1599-6-1 |
| Position | Upper ball joint |
| Lubeable | Yes |
| Lift system | Fabtech Control Arm and Spindle |
| Fitment field |
Vehicle fitment
Fabtech marks this ball joint universal fit. No specific vehicle is confirmed for it.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Because the joint is lubeable, it needs grease during routine maintenance. Confirm the grease type and service interval before servicing it.
What’s included
The product is one upper ball joint. No other parts or hardware are named.









