Overview
The TeraFlex TJ/LJ Dana 30 / Dana 44 Upper and Lower HD Ball Joint Set without Knurling, part number 1353100, is a heavy-duty ball joint kit for the 1997-2006 Jeep Wrangler (TJ) and the 2004-2006 Jeep Wrangler (LJ). The kit is lubeable and a direct fit.
The heavy-duty ball joints are made to handle the extra load from oversized tires and offset wheels. The set covers the upper and lower joints for Dana 30 and Dana 44 axles, and this version is without knurl. Compare the joint size, material and taper with your existing axle parts, and confirm which axle your TJ or LJ has before installing the set.
Key features
- Heavy-duty ball joint set for Dana 30 and Dana 44 axles
- Upper and lower ball joints in one kit
- Without knurling
- Lubeable
- Made for the extra load from oversized tires and offset wheels.
- Direct fit for the TJ and LJ
Ball joint wear on Dana axles
On Dana 30 and Dana 44 axles, the upper and lower ball joints carry the weight of the front end and let the knuckles pivot. Wear shows up as clunking over bumps, wandering steering or uneven tire wear. Oversized tires increase the load on these joints, so they often wear sooner than stock tire setups.
Replace upper and lower joints together so both sides wear evenly, and check the knuckle, tie rod ends and steering stabilizer at the same time. Grease the joints on schedule, but do not rely on grease alone once play appears. After replacement, have the front end aligned, since joint changes shift the steering geometry.
- Clunking over bumps
- Play at the joint with the wheel raised
- Torn or cracked boots
Specifications
| Brand | TeraFlex |
|---|---|
| Part number | 1353100 (also TER1353100) |
| Product type | Axle ball joint set |
| Axles | Dana 30 / Dana 44 |
| Positions | Upper and lower |
| Knurling | Without knurling |
| Lubeable | Yes |
| Kit type | Ball joint kit |
| Fit type | Direct fit |
Vehicle fitment
The set fits the 2004-2006 Jeep Wrangler (LJ) in the Unlimited and Unlimited Rubicon trims, and the 1997-2006 Jeep Wrangler (TJ) in the 65th Anniversary Edition, Rubicon, SE, Sahara, Sport and X trims.
It does not fit the Wrangler YJ, JK or JL. Confirm fit for your vehicle’s year, model and trim before ordering.
Installation notes
Driveline and axle parts rotate at high speed, so professional installation is the safer choice. Support the vehicle securely on jack stands and tighten every fastener to the torque value for your axle hardware. Check clearance and joint angles through the full range of suspension travel, then re-check fasteners and fluid levels after the first few miles. Listen for vibration after any suspension or driveline change and have it inspected if it appears.
What’s included
The kit includes an upper and a lower ball joint. Check the package contents against your installation before starting.









