Overview
The G2 Toyota 8 inch high pinion third member, part number 7-2043-529RL, is a 5.29:1 third member assembly with a Detroit Locker differential. G2 designed the high pinion layout to increase ground clearance and improve driveshaft angles that are compromised by excessive lift.
The assembly is built in house by experienced builders using high-grade components. Confirm the application for your Toyota year and model before installation.
Key features
- High pinion layout that raises ground clearance.
- Aimed at driveshaft angles compromised by excessive lift
- Detroit Locker differential
- 5.29:1 gear ratio
Driveline angles after a lift
Raising a vehicle changes the angle between the transfer case and the axle, and steep angles increase vibration and wear on the U-joints. A high pinion moves the pinion upward, which can reduce the angle the driveshaft has to work through. It is one part of the driveline, so it does not replace correct shaft length or joint angles elsewhere.
Measure the pinion and transfer case angles with an inclinometer before and after installation. Look for drive vibration at highway speed, and check U-joints for play after the first drives. Pinion height also affects gear mesh, so the setup should be done by a qualified builder.
- Measure pinion and transfer case angles
- Check U-joints and slip yoke for wear
- Confirm driveshaft length after the lift
- Watch for vibration at highway speed
Specifications
| Brand | G2 Axle and Gear |
|---|---|
| Part number | 7-2043-529RL |
| UPC | 631410112092 |
| Third member make | Toyota |
| Housing | Toyota 8 inch |
| Pinion | High pinion |
| Differential | Detroit Locker |
| Gear ratio | 5.29:1 |
Vehicle fitment
The housing is a Toyota 8 inch design, so compare it to your own axle before installing.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
A gear set needs professional setup and a break-in period. Because the high pinion is meant to correct driveshaft angles, check the driveline angles after installation.
What’s included
It is a complete third member assembly. Axle shafts, bolts and mounting hardware are not included.









