Overview
The G2 Axle and Gear 95-2015-003 is a forged 1541H steel rear axle shaft for the GM 10 bolt 7.5 inch axle in the 1988–1994 Chevrolet S10 4WD. It has 28 splines and a 5 on 4.75 bolt pattern.
The shaft is marked LH/RH, so one part number covers both sides. It is heat treated to exceed OEM specifications and designed for the added load of high-torque use.
Forged 1541H steel and a 5 on 4.75 bolt pattern are the two details that stand out on the 95-2015-003. It is marked LH/RH, so a single part number covers both sides of the GM 10 bolt 7.5 inch axle. It is heat treated to exceed OEM specifications and engineered for the added load of high torque.
Key features
- Forged 1541H steel
- 28 splines
- 5 on 4.75 bolt pattern
- LH/RH, fits either side
- GM 10 bolt 7.5 inch rear axle
- Heat treated beyond OEM specs
Bolt pattern and wheel fit
A 5 on 4.75 bolt pattern is a specific layout, and it must match the wheel and hub exactly. Confirm the pattern on the wheels you plan to run before installing the shaft, since the shaft by itself does not solve a wheel fit issue. Pay attention to the hub face and the pilot diameter as well, because they determine whether the wheel seats flat.
Forged 1541H steel is a common choice for shafts that see extra torque, but the spline count and bolt pattern still have to match the rest of the axle. Inspect the axle flange for cracks and the bearing for play. A clean, flat mounting face and correctly torqued fasteners make a bigger difference to durability than any single part detail.
Specifications
| Brand | G2 Axle and Gear |
|---|---|
| Part number | 95-2015-003 |
| UPC | 631410106008 |
| Product type | Replacement axle shaft |
| Axle type | GM 10 Bolt 7.5 inch |
| Axle location | Rear |
| Shaft position | Driver Or Passenger |
| Spline count | 28 |
| Material | Forged 1541H steel |
| Bolt pattern | 5 on 4.75 |
| Stated application | 88-94 S-10 4WD |
Vehicle fitment
It is made for the 1988–1994 Chevrolet S10 4WD. Earlier or later S10 trucks are outside this fit, so confirm your vehicle’s year, model and trim before ordering.
The list begins at 1988 and ends at 1994, so earlier or later S10 trucks are not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
- Check the 5 on 4.75 bolt pattern of your wheels before fitting the shaft.
- The 28-spline count must match your 10 bolt differential gears.
What’s included
One rear axle shaft that fits either side (95-2015-003).
Not included: wheel studs for the 95-2015-003.








