Overview
The FOX Factory Race Series Gen2 IFP 2.0 983-02-170 is a short air bump stop for the 2007–2018 Jeep Wrangler JK. It is built to control bottoming out in the last few inches of suspension travel, and it is based on FOX’s off-road racing bump stops.
The Gen2 design combines damping performance with bottom out control. The threaded body sets the height at which the stop engages on up travel, and an internal floating piston keeps the oil and nitrogen separated.
Key features
- Threaded body for fine-tuning when the stop engages during up travel
- Internal floating piston separates oil and nitrogen to prevent cavitation
- Negative coil spring softens initial impacts and harsh top-outs
- FOX air valve located at the bottom of the shaft for easy access
- Replaceable strike pad protects the air valve
Setting up the stop
An air bump stop works in the last part of suspension travel, where it adds increasing resistance to prevent harsh bottoming out. The engagement point depends on the mounting height, so the threaded body is used to set when the stop begins to work. Setting it correctly is what determines how the stop feels on the trail.
Because the air valve is at the bottom of the shaft, its strike pad takes impacts and should be inspected for wear and damage. Keep the valve capped and clean, and check the stop’s behavior after long periods of use. Shock tuning and spring rate affect how often the stop engages, so review the setup with the rest of the suspension in mind.
- Set the mounting height before the first drive
- Inspect the strike pad for wear
- Keep the air valve clean and capped
- Check how often the stop engages on trail runs
Specifications
| Brand | FOX |
|---|---|
| Part number | FOX983-02-170 |
| Type | Air bump stop |
| Length | Short |
| Adjustment | Threaded body for mounting height |
| Air valve | FOX AIR VALVE, bottom of shaft, with replaceable strike pad |
| Fitment | Direct fit |
Vehicle fitment
It fits the 2007–2018 Jeep Wrangler JK in the 70th Anniversary, 75th Anniversary, Rubicon, Sahara, Sport, Sport S and X trims, in both 2-door and 4-door bodies.
Wrangler JL and earlier Wrangler TJ and LJ models are not on the list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The threaded body sets the height at which the stop engages on up travel, so the mounting height should be set for the desired engagement point. Because the air valve sits at the bottom of the shaft, the strike pad protects it and should be checked for wear.













