Overview
The Rock Krawler RK07123 is a front and rear bump stop kit for the 2007–2018 Jeep Wrangler JK. It includes everything needed to set the bump stops from 1 to 4 inch at both the front and the rear.
Bump stops limit how far the suspension can compress, and adjusting them sets the point where the stop takes the load. A kit that covers both ends of the truck lets the owner match the front and rear travel, so the axles stay within their limits when the suspension is at full compression.
Key features
- Front and rear bump stop set-up
- Adjustable from 1 to 4 inch
- Includes everything needed for the JK bump stop setup.
- Direct fit to the listed Wrangler JK trims
- Single kit for the whole truck
Setting Front and Rear Together
Front and rear bump stops work as a pair to limit axle travel. If one end engages at a different point than the other, the axles can reach their limits at different times, which changes how the truck handles at full compression. Setting both ends from the same kit makes it easier to keep the two sides consistent.
Work through the adjustment in small steps and recheck the stop contact at full compression each time. Check the bump stop bodies for cracks and the mounting hardware for looseness after the first few trail runs. Note the setting used for each end so it is easy to match if the stops are removed and reinstalled.
- Adjust front and rear in matching steps
- Recheck contact at full compression after each change
- Record each end’s setting for future service
Specifications
| Brand | Rock Krawler |
|---|---|
| Part number | RKSRK07123 |
| Adjustment range | 1 to 4 inch |
| Position | Front and rear |
| Fitment | Direct fit |
Vehicle fitment
It fits the 2007–2018 Jeep Wrangler JK in 70th Anniversary, 75th Anniversary, Rubicon, Sahara, Sport, Sport S and X trims, in both 2-door and 4-door bodies.
Wrangler JL and older Wrangler models are not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Both the front and rear bump stops are set with this kit. Set the adjustment so the stops engage at the intended point of travel, and take the truck’s lift height into account when choosing the setting.









