Overview
The Energy Suspension 2.9103R is a red rear bump stop set in performance polyurethane for the 2007–2018 Jeep Wrangler JK, in both 2-door and 4-door bodies, and for the 2018 Wrangler JL Unlimited Moab. The stops cushion a suspension as it collapses and help prevent bottoming out.
The bump stops are made of HYPER-FLEX performance polyurethane and are used on control arms, traction bars and leaf springs. The set is a rear position part.
Key features
- Performance polyurethane bump stops
- Helps prevent bottoming out and damage to the suspension springs
- Sold as a set for the rear
- Red finish
- Fits JK 2-door and 4-door models
Inspecting rear bump stops
Rear bump stops cushion the suspension as it collapses, which helps protect the springs and reduces harsh impacts when the Wrangler lands in a rut or on a sharp bump. Because they carry load at full compression, the stops should be checked for flattening, splitting or heat damage. A stop that has changed shape no longer cushions the same way.
Polyurethane stops are usually replaced as a set so that both sides behave the same. When installing a new set, check the stop contact at full compression and confirm it does not hit the frame or the spring perch before the vehicle is loaded.
- Check the set for splits or flattening
- Replace both sides together
- Confirm clearance at full compression
- Look at the spring perch for cracks
Specifications
| Brand | Energy Suspension |
|---|---|
| Part number | ENE2.9103R |
| Position | Rear |
| Material | Performance polyurethane |
| Color | Red |
| Type | Bump stop set |
| Fitment | Direct fit |
Vehicle fitment
It fits the 2007–2018 Jeep Wrangler JK in 2-door form in the 70th Anniversary, 75th Anniversary, Rubicon, Sahara, Sport, Sport S and X trims, and in 4-door Unlimited form in the matching trims. It also fits the 2018 Wrangler JL Unlimited Moab.
Wrangler JL models other than the Unlimited Moab are not on the list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The set installs at the rear. After installation, check the stop contact at full compression.









