Overview
The TeraFlex 1958250 is a SpeedBump bump stop kit for the 2007–2018 Jeep Wrangler JK in its Rubicon, Sahara, Sport and X trims in 2-door and 4-door form. The composite SpeedBump system fits JK models with 2.5 inch of lift.
The progressive design reduces the impacts and harsh bottoming that happen when the suspension compresses hard. That helps lower the risk of bent axle housing tubes and keeps the suspension controlled off road or on rough highways. The stops are made of nitrogen charged microcellular polyurethane that is designed to hold up under extended heavy use.
Key features
- Composite SpeedBump stops, front and rear
- Performance tuned closed-cell nitrogen charged microcellular polyurethane
- Delrin acetal resin shaft, self-lubricating for many cycles
- External shaft seal that wipes and cleans the shaft
- Front adjustment spacers and front lower strike pads included
Care and bump stop inspection
Bump stops limit how far the axle can travel when the suspension compresses, so they take a lot of hard impacts on trails and rough roads. Over time, stops can crack, flatten or chunk at the edges, and a worn stop may let the axle bottom out harder than before. Inspection during each service keeps the suspension working as intended and reduces the chance of damage to the housing.
Lift changes shift suspension travel, so the stops should be checked after any change to shocks, springs or other lift parts. Confirm that the stops have clearance from the axle and frame at full compression, and keep the shaft seal clean so contaminants stay out of the housing.
- Inspect stops for cracks, flattening or chunking
- Check the strike pads and mounting hardware
- Keep the external shaft seal clean
- Recheck clearance after changing shocks or springs
Specifications
| Brand | TeraFlex |
|---|---|
| Part number | TER1958250 |
| Material | Microcellular polyurethane, Delrin acetal resin shaft |
| Lift range | 2.5 inch |
| Maintenance | Maintenance free, no custom adjustment or tuning |
| Fitment | Direct fit |
Vehicle fitment
It fits the 2007–2018 Jeep Wrangler JK in its Rubicon, Sahara, Sport and X trims, in 2-door form, and in its Unlimited Rubicon, Unlimited Sahara, Unlimited Sport and Unlimited X trims, in 4-door form.
This kit covers the 2007–2018 Wrangler JK with 2.5 inch of lift only. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Installation is bolt on and requires removal of the factory bump stop bell on front applications only, with no welding needed. The microcellular polyurethane stays flexible at sub-zero temperatures and is unaffected by temperature extremes. The stops are maintenance free and need no adjustment. The external shaft seal wipes and cleans the shaft to help keep contaminants out of the housing.
What’s included
Two front SpeedBump stops, two rear SpeedBump stops, front adjustment spacers and front lower bump stop strike pads.









