Overview
The TeraFlex 1467125 is a pair of front lower bump stop pads, 1.25 inch tall, made to work with the TeraFlex SpeedBump bump stop system on the 2007–2018 Jeep Wrangler JK. The pads extend the effective bump stop length by 1.25 inch, which TeraFlex says is needed to keep the bump stop from bottoming against the wrong surface on a lifted truck.
Installation is a simple bolt-on job. Proper bump stop length is critical to prevent damage to suspension components, shock absorbers and fenders, and the pads come as a pair.
Key features
- Front lower bump stop pad
- Extends effective bump stop length by 1.25 inch
- Designed for the SpeedBump bump stop system
- Sold as a pair
- Simple bolt-on installation
Lift height and stop length
Lower bump stop pads change the point where the suspension meets the stop, so they affect how the front axle reaches its limit. On a lifted JK, the stop can contact the wrong surface if the effective length is not matched to the lift. Measuring clearance at full compression helps prevent damage to the shock absorbers and fenders.
Pads that add length to the bump stop should be checked whenever the suspension is changed. Look at the shock length, the brake hose routing and the steering clearance after installation. Inspect the pads at service for cracks, loose fasteners and uneven wear, since uneven wear can shift the contact point.
- Measure clearance at full compression
- Check shock length after any suspension change
- Inspect brake hose routing near the axle
- Look for uneven wear on the pads
Specifications
| Brand | TeraFlex |
|---|---|
| Part number | TER1467125 |
| Position | Front lower |
| Height | 1.25 inch |
| Quantity | Pair |
| Fitment | Direct fit |
Vehicle fitment
It fits the 2007–2018 Jeep Wrangler JK in the Rubicon, Sahara, Sport and X 2-door trims, and the Unlimited Rubicon, Unlimited Sahara, Unlimited Sport and Unlimited X 4-door trims.
Wrangler JL and earlier models are not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The lower pads bolt on and work together with the SpeedBump system. Because they add 1.25 inch to the effective length, check clearance at full compression after installation.










