Overview
The Currie CE-9112N75-14 is a narrow style forged Johnny joint, a rod end built to pivot a linkage through a wide arc. It features 40 degrees of overall articulation travel, and Currie markets the design as an exclusive.
Articulation and mounting checks
A Johnny joint works best when its arc is planned around the parts next to it. As the linkage moves, the joint rotates through its travel, and the mounting bracket, nearby brake lines and frame rails must stay clear at the far end of that movement. Measure the swept path with the suspension at ride height and again at full droop before settling on a mounting position.
Joints are usually replaced along with the links and hardware they connect to. A tired neighbor can push extra side load into a fresh joint, so inspect the bushings, tie rods and track bar mounts at the same time. Keep the threads clean and fully engaged, and use a proper jam nut tightened to the fastener specification for your application.
- Check for sideways play at the pivot
- Look for cracked housings or bent shanks
- Inspect the boot for tears and dried grease
Specifications
| Brand | Currie |
|---|---|
| Part number | CE-9112N75-14 |
| UPC | 70000662407 |
| Style | Narrow, forged |
| Overall articulation travel | 40 degrees |
Vehicle fitment
It is a universal fit joint, so it is not tied to a particular make, model or year. Match the joint to your year, model and trim before buying.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
Check the package contents against your installation before starting.









