Overview
The Currie CE-9112NC-12 is a narrow 2 inch forged Johnny Joint rod end with a 1 inch right-hand threaded shank, meant for universal custom builds rather than one model. Currie first developed the narrow body for JK track bars, and this joint is now offered on its own for replacements and custom work.
The joint has a 1/2 inch thru-bolt hole in a 2 inch mounting width, and its shank carries 5 inch of 1 inch-14 right-hand threads. The forged rod end takes internals made for the narrow design, and the finish is gold zinc plating. The outer shell is greaseable. It is non-serviceable, so plan on replacing the joint rather than rebuilding it.
Key features
- Narrow forged rod end with a 2 inch mounting width
- 1/2 inch thru-bolt hole
- 5 inch of 1 inch-14 right-hand threads on the shank
- Greaseable through the outer shell
- Gold zinc plated finish
- Finished joint with forged construction
Maintenance planning for a non-serviceable joint
A non-serviceable joint cannot be rebuilt in the usual way, so its service life depends on how it is greased and how the suspension is set up. Keep the outer shell greased where a fitting is present, and avoid running the joint dry after washing or water crossings. Look for play, cracks in the shell and torn seals at every service, and replace the joint instead of trying to rebuild it.
Joint wear often shows up first as clunks over bumps or loose-feeling steering. Check the stud threads and jam nut for looseness, and confirm the arm is not bent around the joint. When swapping any part of the front or rear linkage, measure alignment afterward and re-check the joint after the first few trips.
Specifications
| Brand | Currie |
|---|---|
| Part number | CE-9112NC-12 |
| UPC | 700007998111 |
| Joint type | Finished joint, forged |
| Mounting width | 2 inch |
| Thru-bolt hole | 1/2 inch |
| Threads | 5 inch of 1 inch-14, right hand |
| Finish | Gold zinc plating |
| Maintenance (joint details) | Non-serviceable |
| Lubrication (description) | Greaseable through outer shell |
Vehicle fitment
The CE-9112NC-12 has no specific vehicle fitment. It is a universal part, and the narrow design was first developed for JK track bars, so compare your application before ordering.
Do not treat the track bar history as a fitment statement for this joint. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Use internals made for the narrow design, and confirm the maintenance details before you plan how the joint will be greased.
What’s included
A narrow forged Johnny Joint rod end with right-hand 1 inch-14 threads.
Not included: Jam nut CE-9113JN is a separate part and is not included.









