Overview
The Crown Automotive crankshaft thrust bearing, part number J8133255, is a .010 inch oversized thrust bearing for the crankshaft. A thrust bearing controls crankshaft end play, and this oversize version is intended for a crankshaft that has been machined to take it.
It fits Jeep Cherokee XJ, CJ7, Comanche, Grand Wagoneer SJ, J10 and J20 trucks, Scrambler, Wagoneer SJ and Wrangler YJ models.
Key features
- .010 inch oversize crankshaft thrust bearing
- Crown Automotive part number J8133255
- Lists 1981–1990 Wagoneer SJ and 1987–1990 Wrangler YJ among other models
- Cherokee XJ trims listed include Chief, Laredo, Limited, Pioneer and Sport
Checking thrust bearing wear
A thrust bearing holds the crankshaft in place front to back, so wear here shows up as movement rather than noise at first. Excess end play can make the clutch feel uneven, cause a clicking sound under throttle changes, and allow the crank to knock against the thrust faces. A dial indicator set against the crankshaft nose is the usual way to measure end play during assembly, and the reading shows whether an oversize bearing is needed at all.
Because the thrust faces wear along with the crank, inspect the crankshaft journal and thrust surfaces for scoring, grooves or heat marks before fitting anything new. A machine shop can grind the journal to suit an oversize bearing, but that work should be checked against the measurements taken. Keep the bearing caps torqued in sequence and make sure the oil groove lines up with the oil feed when you install the bearing. Clean every oil passage before reassembly.
Specifications
| Brand | Crown Automotive |
|---|---|
| Part number | J8133255 |
| UPC | 848399071504 |
| Part type | Crankshaft thrust bearing |
| Size | .010 inch oversize |
Vehicle fitment
Crown Automotive’s list includes the 1984–1990 Jeep Cherokee (XJ), 1983–1986 CJ7, 1986–1990 Comanche, 1984–1986 Grand Wagoneer (SJ), 1981–1987 J10, 1981–1986 J20, 1983–1985 Scrambler, 1981–1990 Wagoneer (SJ) and 1987–1990 Wrangler (YJ).
Other years of these models, and the Wrangler TJ and JK, are not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Thrust bearings are normally fitted during an engine rebuild. Measure the crankshaft before selecting an oversize bearing, since the .010 inch size only suits a crankshaft machined to match it.
What’s included
The package contains one oversize crankshaft thrust bearing.
Not included: other main and rod bearings, and crankshaft machining.









