Overview
It is a flanged rear pinion oil seal for the Chrysler 8.25 rear axle, installed in the rear position.
It fits the 1991–2000 Jeep Cherokee (XJ) in Base, Briarwood, Classic, Country, Laredo, Limited, SE and Sport trims. Grand Cherokee and Wrangler models are outside this range.
Key features
- Flanged pinion oil seal
- Made for the Chrysler 8.25 rear axle
- Rear position
Pinion seal care
The pinion seal keeps gear oil in where the driveshaft yoke enters the differential. Leaks usually show as a dark film around the pinion yoke or drips at the front of the axle housing. A worn seal can let fluid drop low enough to starve the pinion bearings, which is why small leaks are worth fixing early.
When replacing a flanged seal, check the yoke surface for grooves or rust where the lip rides, because a damaged surface will wear a new seal quickly. Use a seal driver rather than a hammer to avoid tilting the seal. Refill the axle with the lubricant named in the service manual after the seal is in and the yoke nut is torqued.
- Check the fluid level before and after the job
- Inspect the yoke for grooves or pitting
- Clean the housing face before fitting
Specifications
| Brand | Crown Automotive |
|---|---|
| Part number | 52067595 |
| UPC | 848399015232 |
| Axle | Chrysler 8.25 |
| Position | Rear |
| Seal type | Flanged |
Vehicle fitment
It fits the 1991–2000 Jeep Cherokee (XJ) in Base, Briarwood, Classic, Country, Laredo, Limited, SE and Sport trims.
The list does not include the Grand Cherokee or any Wrangler model.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
One flanged pinion oil seal.
