Overview
The Crown Automotive Dana 30/44 pinion seal, part number 83503390, is a pinion seal for the 1991 to 1993 MJ Comanche with a Dana 44 and locking differential.
This seal fits the Dana 44 with a locking differential for the Comanche. Confirm which axle your vehicle has before ordering.
Key features
- Pinion seal for Dana 44 axles with locking differential
- Fits the 1991 to 1993 MJ Comanche
- Direct fit for the 1991 to 1993 MJ Comanche
- Crown Automotive replacement part
Pinion seal replacement planning
The pinion seal sits at the front of the differential where the driveshaft yoke turns. It keeps gear oil inside the housing while the pinion rotates, so a worn seal usually shows up as oil on the outside of the carrier or on the driveshaft yoke. Leaks that go unchecked can drain the gear oil and damage the pinion bearings, which are costly to repair.
Because the yoke usually comes off for this job, plan the work around the pinion nut and preload. Mark the yoke and nut position before removing them, and replace the crush sleeve or collapsible spacer if the design uses one, since reusing it can change preload. Check the yoke for wear where the seal rides, and clean the carrier surface so the new seal sits flat.
- Look for gear oil on the carrier or driveshaft yoke
- Mark the pinion nut and yoke before removing them
- Check the yoke sealing surface for grooves or wear
- Refill with the correct gear oil after the seal is installed
Specifications
| Brand | Crown Automotive |
|---|---|
| Part number | 83503390 |
| UPC | 848399025422 |
| Seal type | Pinion seal |
| Axle | Dana 44 with locking differential |
| Vehicle | 1991 to 1993 MJ Comanche |
| Fitment label | Direct fit |
Vehicle fitment
It fits one vehicle: the 1991 to 1993 MJ Comanche with a Dana 44 and locking differential.
Comanche years outside 1991 to 1993, and Dana 44 axles without a locking differential, are not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Plan for a driveline disconnect, since the pinion yoke usually has to come off to replace this seal.
What’s included
The package is the pinion seal only.









