Overview
The Body Armor TN-2961 is a rear base bumper in textured black powder coat for the 2007–2013 Toyota Tundra.
The bumper has a center step area with a license plate mount, reuses the OEM license plate lights and retains the OEM hitch. It is made of 3/16″ thick steel plate, mounts to the OEM frame brackets, and attaches with eight grade 8 bolts through a 1/4″ thick steel plate with recovery shackles. Body Armor finishes it with a dual process textured black powder coat.
Key features
- 3/16″ thick steel plate construction
- Center step area with license plate mount
- Reuses the OEM license plate lights
- Retains the OEM hitch
- Mounts to the OEM frame brackets with eight grade 8 bolts
- Recovery shackles on a 1/4″ thick steel plate
- Accepts the TN-5293 swing arm tire carrier
- Dual process textured black powder coat
Swing arm carrier considerations
A rear base bumper carries more load than its size suggests, especially when a tire carrier or recovery shackles are used. The bumper bolts to the frame brackets, so those brackets, the frame mounting points and the bolt heads should be checked for rust and cracks before and after heavy use. Corrosion around the bolts is often the first sign that a joint needs attention.
When a swing arm is added, the shackle plates are swapped for the latch and bearing barrel plates, so the hardware changes too. Keep track of each plate and bolt during the swap, and torque the new fasteners evenly. A carrier also changes the rear license plate position and the way the tailgate opens, so check clearance before driving.
- Check frame brackets for rust or cracks
- Torque bolts evenly after any hardware swap
- Confirm tailgate clearance with the carrier
Specifications
| Brand | Body Armor 4×4 |
|---|---|
| Part number | TN-2961 |
| UPC | 859909002499 |
| Product type | Rear base bumper |
| Material | Steel plate, 3/16″ thick |
| Finish | Dual process textured black powder coat |
| Mounting hardware | Eight grade 8 bolts |
| Shackle plate | 1/4″ thick steel |
| Fitment type | Direct fit, bolt on |
| D-ring mount | Included |
| Hitch | Retains OEM hitch |
| Swing arm | Accepts TN-5293 |
Vehicle fitment
The TN-2961 fits the 2007–2013 Toyota Tundra.
Tundra years outside 2007–2013 are not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The bumper bolts to the OEM frame brackets. To add the TN-5293 swing arm tire carrier, replace the shackle plates with the latch plate and bearing barrel plates.
What’s included
- Rear base bumper with recovery shackles
Not included: the TN-5293 swing arm tire carrier, latch plate and bearing barrel plates.








