Overview
The Body Armor 4×4 ECO Series rear bumper, part DG-2964, is a textured black rear bumper for the 2009–2010 Dodge Ram 1500 and the 2011–2018 Ram 1500. Body Armor 4×4 designed it to add style to the truck and to work with the factory hitch.
Each corner has a convenient step pocket. Each bumper wing has a pentagon patterned mesh pocket, and these pockets double as light mounts for dual cube LED lights.
The bumper also has provisions for backup sensors, hitch electrical hookup and a spare tire crank access pocket, plus mounts for the OEM license plate lights. It is painted in the brand’s textured black powder coat.
The brand’s ECO-Series front bumper is designed to pair with this rear bumper.
Key features
- Step pockets at each corner
- Pentagon patterned mesh wing pockets that double as dual cube LED light mounts
- Provisions for backup sensors and hitch electrical hookup
- Spare tire crank access pocket
- Mounts for OEM license plate lights
- Textured black powder coat
Hitch and sensor wiring
The bumper is designed to work with the factory hitch, so the original receiver stays in place and the hitch wiring is used. Hitch electrical hookup provisions help a trailer connection run cleanly. Confirm the trailer plug matches the harness before connecting, and check the hitch bolts after the first tow.
Backup sensors and license plate lights share the rear wiring path, so run each harness in its own loom and secure it away from the exhaust. Step pockets at each corner can collect mud and grit, so clean them periodically. Inspect the wing mesh pockets after trail use for bent edges or loose fasteners, since those pockets carry the light mounts.
- Match the trailer plug to the harness
- Keep sensor and light harnesses separate
- Clean step pockets after muddy use
Specifications
| Brand | Body Armor 4×4 |
|---|---|
| Part number | DG-2964 |
| Position | Rear |
| Finish | Textured black powder coat |
| Receiver hitch | Not included; designed to work with the factory hitch |
| Hitch electrical | Hookup provisions included |
| Backup sensors | Provisions included |
| Fit style | Direct fit |
| D-ring mount | Not included |
| Tire carrier | No |
| Light mounts | Dual cube LED mounts in wing pockets |
Vehicle fitment
The fitment covers the 2009–2010 Dodge Ram 1500 and the 2011–2018 Ram 1500.
Ram 2500 and 3500 models and Ram 1500 model years from 2019 onward are not on the list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Installation is a bolt-on job. The bumper is designed to work with the factory hitch, so the factory hitch stays in place.
What’s included
Mounts for the OEM license plate lights, and provisions for backup sensors and hitch electrical hookup. Not included: a receiver hitch and a D-ring mount.











