Overview
The ECO Series rear bumper is a textured black rear bumper for Ram 2500 and Ram 3500 trucks, covering the 2010 models and the 2011–2018 models. It adds style to these trucks.
The bumper has a step pocket at each corner. Pentagon patterned mesh pockets in each wing serve as mounting points for dual cube LED lights.
Provisions are included for backup sensors, hitch electrical hookup and a spare tire crank access pocket. Mounts for the OEM license plate lights are also included.
The bumper is designed to work with the factory hitch and carries a textured black powder coat.
Key features
- Step pocket at each corner
- Pentagon patterned mesh wing pockets with dual cube LED mounts
- Provisions for backup sensors and hitch electrical hookup
- Spare tire crank access pocket
- Mounts for OEM license plate lights
- Textured black powder coat
Wing mounts and wiring plan
Wing mesh pockets make useful places for dual cube lights on a heavy-duty truck. Mount the lights so their beam clears the bumper edge and does not shine into the cab mirrors. Run the wiring through the rear frame with loom and clips, and keep it away from the exhaust and the spare tire access area.
Backup sensors need a clean path through the rear panel, and their harness should be separated from light wiring to reduce noise. Hitch electrical hookup uses the factory connector, so keep that plug dry and free of mud. Check the bumper bolts after the first heavy loads, and inspect the powder coat near the hitch for chips that could start corrosion.
When the factory hitch stays in service, look at the receiver and pin condition regularly, especially after towing a loaded trailer.
- Aim cube lights below the bumper edge
- Separate sensor and light harnesses
- Keep the hitch plug dry
Specifications
| Brand | Body Armor 4×4 |
|---|---|
| Part number | DG-2963 |
| Position | Rear |
| Finish | Textured black powder coat |
| Receiver hitch | Designed to work with the factory hitch |
| Light mounts | Dual cube LED mounts in wing pockets |
Vehicle fitment
The fitment covers the 2010 Ram 2500 and 3500 and the 2011–2018 Ram 2500 and 3500.
The list does not include the Ram 1500, and it has no Ram 2500 or 3500 model years outside 2010 and 2011–2018. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The bumper is a bolt-on part, and it is designed around the factory hitch, which stays in place.
What’s included
Mounts for the OEM license plate lights, and provisions for backup sensors and hitch electrical hookup. Not included: the receiver hitch, since the factory unit is used.









